Coventry · England
Bath re-enamelling & resurfacing in Wood End, Coventry
Problem with your bath in Wood End? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that won’t shift
How we handle bath re-enamelling in Wood End
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include chips and rust in more than one place and worn patches where water runs and sits, on basins & shower trays, cast iron baths and pressed steel baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Wood End (CV7, CV10)
- Region
- Coventry
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Access to the area
- How many items we do on one visit
- What kind of damage it is
- The material and finish
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Two or three clear photos are typically enough. Try to include:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Something in shot to show the size
- Natural light rather than flash
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Common problems we fix in Wood End
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
You may need us if you’ve spotted:
- Staining under the taps and around the waste
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
Before you book anyone
- How the colour is matched
- How long the guarantee is and what it covers
- Aftercare advice
- How your room will be protected
About Wood End
Wood End is about 4 miles west of Bedworth, in Coventry. Our technicians come to customers in Wood End, so nothing has to leave your home. Wood End is one of 88 places in Coventry where we work. Our jobs stretch from Wood End to Birmingham (about 14 miles away).
We work across the CV7 and CV10 postcode area. Jobs here include addresses on Sandy Lane, Wood End Lane and Nuneaton Road. If you’re just outside Wood End, we cover Fillongley (1 mile south-west), Corley Ash (1 mile south), Red Hill (1 mile south), Corley (2 miles south) and Corley Moor (2 miles south-west). We also work in nearby towns such as Coventry (6 miles south-east), Hillfields (6 miles south-east), Bishopsgate Green (6 miles south-east), Radford (5 miles south-east), Ernesford Grange (8 miles south-east) and Foleshill (6 miles south-east).
Local landmarks in Wood End
Locally, our jobs take us to homes close to Bournebrook CofE Primary School, Church of St Mary and All Saints and Butchers Public House and the streets around them. The closest station to Wood End is Bermuda Park station, about 4.2 miles east. Further afield, we also cover the area around George Eliot Hospital (4.2 miles east) and Maxstoke Castle (4.4 miles west).
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Do not leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Don’t leave bottles, razors or sponges standing on the surface
Wipe the bath dry after use where you can, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Nearby places to Wood End
Other services in Wood End
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What we can’t put right
Some jobs aren’t right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Wood End: your questions answered
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How long is the bath unusable?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take a full day, and you can get on with other things while we’re there.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
