Stirling · Scotland
Bath Re-enamelling in Fintry
Bath re-enamelling for Fintry, without a refit. Get a fixed quote from your photos, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
How we handle bath re-enamelling in Fintry
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. Common call-outs are for several chips and rust patches and staining under the taps and around the waste, across cast iron baths, pressed steel baths and basins & shower trays.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Fintry (G63)
- County
- Stirling
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- How hard the colour is to match
- The size and number of damaged areas
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Natural light rather than flash
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Towns and villages near Fintry
Also in Fintry
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
What we’re called out for in Fintry
Frequently the bath has just had decades of use. The body of the bath is typically perfectly sound.
It’s worth getting a quote if you see:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
Before you book anyone
- How your room will be protected
- How long it needs to cure
- What the guarantee covers, and for how long
- Who will actually do the work
Fintry questions
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
It’s been repaired before. Can you still fix it?
Normally, yes. The old repair comes out first.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How do I get a price for bath re-enamelling in Fintry?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Landlord and trade work in Fintry
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Fintry and the surrounding area
Fintry is about 9 miles north of Kirkintilloch, in Stirling. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 55 towns and villages across Stirling. Our jobs stretch from Fintry to Glasgow (14 miles away).
We cover every part of G63. That includes homes on Main Street, Culcreuch Avenue and Kippen Road and the roads around them. We also travel to Balfron (4 miles west), Clachan of Campsie (5 miles south), Buchlyvie (5 miles north-west), Boquhan (5 miles west) and Haughhead (5 miles south). We also work in nearby towns such as Stirling (12 miles east), Dunblane (14 miles north-east), St. Ninians (11 miles east), Raploch (12 miles north-east), Cornton (12 miles north-east) and Torbrex (11 miles east).
Near you in Fintry
Locally, our jobs take us to homes close to Old Fintry Parish Church, among other places. Further afield, we also cover the area around Culcreuch Castle (0.5 miles north-east). Green spaces nearby include Stronend.
Repairing versus replacing in Fintry
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Fintry clients choose us
- No need to remove anything
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
- We leave the room as we found it
Read our full price list or guide to resurfacing and replacement costs.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Getting a price
Most clients in Fintry get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
