Lancashire · England
Bath re-enamelling & resurfacing in Four Lane Ends, Lancashire
We travel to Four Lane Ends for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
How we handle bath re-enamelling in Four Lane Ends
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with stains that won’t shift and an old resurfacing that’s failing, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Four Lane Ends (L39)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Four Lane Ends questions
What happens after I send pictures?
You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How long is the bath unusable?
Normally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
About Four Lane Ends
Four Lane Ends is about 2 miles west of Skelmersdale, in Lancashire. Across the L39 area, we come to you. Our repair technicians cover 482 places in Lancashire. You can also see our page for Liverpool, about 10 miles away.
All of L39 is within our area. Nearby, we also work in Stanley Gate (1 mile west), Bickerstaffe (1 mile south-west), Blaguegate (1 mile north-east), Brighouse Green (1 mile north) and Barrow Nook (2 miles south). Larger places within reach include Chorley (11 miles north-east), Bamber Bridge (15 miles north-east), Leyland (12 miles north-east), Ormskirk (3 miles north-west), Penwortham (15 miles north) and Lytham (15 miles north).
Near you in Four Lane Ends
In Four Lane Ends, that means homes near Church of Holy Trinity, Bickerstaffe Voluntary Controlled Church of England School and Lathom High School : A Technology College and the streets around them. Four Lane Ends’s nearest station is Rainford station, roughly 2.2 miles south-east of the centre. A little further out are Ormskirk and District General Hospital (2.5 miles north-west).
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Nearby places to Four Lane Ends
What else we do in Four Lane Ends
Landlord and trade work in Four Lane Ends
If you manage property in Four Lane Ends, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Signs you need bath re-enamelling in Four Lane Ends
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- An outdated colour you’d like to change
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
What to look for in a quote
- What prep work is covered
- How the colour is matched
- How changes to the job are handled
- What protection goes down before work starts
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Four Lane Ends. What changes the price is:
- The size and number of damaged areas
- Whether we combine several jobs
- The colour and finish to match
- Where the damage is and how we get to it
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A coin or ruler next to the damage for scale
- Any details about the material
- A wider photo showing the whole bath
- Natural light rather than flash
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Do not leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
