Lancashire · England
Bath Re-enamelling in Brighouse Green
We travel to Brighouse Green for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- An outdated colour you’d like to change
How we handle bath re-enamelling in Brighouse Green
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Whether it’s a coating lifting around the plughole and a roll-top that’s seen better days, we can help, on basins & shower trays, acrylic baths and Victorian roll-tops alike.
Every job is backed for twelve months in Brighouse Green and everywhere else. We return to put right any problem with the work.
- Area
- Brighouse Green (L40)
- Region
- Lancashire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Brighouse Green
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Which areas do you work in?
The whole UK, including all of Lancashire. Just include your postcode and we’ll offer you dates.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- A bath that is rusted through
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Places near Brighouse Green
What else we do in Brighouse Green
Signs you need bath re-enamelling in Brighouse Green
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- An old resurfacing that is failing
- A coloured bath you want in white
- Thin, worn enamel in places
What your quote should include
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- Whether they match the colour on site
- Whether a trained technician does the job
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Get a quote
Email us a photo of the damage and one of the whole item, and tell us you are in Brighouse Green, and we’ll come back with a fixed quote.
Advice
Where we work around Brighouse Green
Brighouse Green is about 2 miles east of Ormskirk, in Lancashire. Jobs in Brighouse Green are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Brighouse Green is one of 482 towns and villages in Lancashire we cover. Our jobs stretch from Brighouse Green to Liverpool (11 miles away).
Postcode districts we cover here: L40. We also travel to Westhead (1 mile north-west), Blaguegate (1 mile south-east), Scarth Hill (1 mile west), Stanley Gate (1 mile south) and Four Lane Ends (1 mile south). Further out, we also cover Preston (15 miles north), Chorley (10 miles north-east), Lytham St Anne's (15 miles north-west), Bamber Bridge (14 miles north-east), Leyland (11 miles north-east) and Penwortham (13 miles north).
Near you in Brighouse Green
Our clients here include homes close to Church of St James, Ormskirk School and Westhead Lathom St James' Church of England Primary School. Brighouse Green’s nearest station is Ormskirk station, roughly 2 miles west of the centre. Well-known places in the area include Ormskirk and District General Hospital (1.5 miles west). For a walk, there’s Martin Mere and WWT Martin Mere.
Prices and what affects them
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- The colour and finish to match
- The type of damage
- How much damage there is
- Whether we combine several jobs
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Photographing the damage takes a minute. Please include:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why us?
- Work done at your home or business
- Colour-matched on site
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
Read our pricing or resurfacing vs replacement cost guide.
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Aftercare tips
How the surface is treated afterwards matters:
- Do not leave a chip unrepaired
- Repair dripping taps early
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
