Hampshire · England
Bath Re-enamelling in Foxcotte
Bath re-enamelling in and around Foxcotte: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
About our bath re-enamelling in Foxcotte
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you are dealing with worn patches where water runs and sits and an old resurfacing that’s failing, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
Whatever the size of the job, you get the same one-year guarantee in Foxcotte and across Hampshire.
- Location
- Foxcotte (SP10)
- Area hub
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before booking. We take into account:
- How much damage there is
- How many items we do on one visit
- What kind of damage it is
- Where the damage is and how we get to it
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- The material, if you know it
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Work for landlords and builders
For anyone letting property in or around Foxcotte, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Other services in Foxcotte
Repairing versus replacing in Foxcotte
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Foxcotte. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Foxcotte customers choose us
- Fixed prices from your pictures
- We leave the room as we found it
- Work done at your home or business
- Nothing taken out or refitted
Read our prices page and bath cost comparison.
FAQs for Foxcotte
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is the work guaranteed?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
How do I book?
Use the quote form or ring 0345 017 0787.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How long is the bath unusable?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your SP10 postcode.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know about parking or access
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
Getting a price
Most customers in Foxcotte get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Our work in Foxcotte
Foxcotte is about 2 miles north-west of Andover, in Hampshire. Whether you are in the middle of Foxcotte or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Foxcotte to London (about 64 miles away).
All of SP10 is covered, from the main roads to the quietest streets. We also cover the places around Foxcotte: Charlton (1 mile south-east), Penton Mewsey (1 mile west), Penton Grafton (1 mile west), Penton Corner (1 mile south-west) and Hatherden (2 miles north). Within a short drive, we also cover Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (7 miles west), Weeke (13 miles south-east), Stanmore (14 miles south-east) and Ludgershall (5 miles west).
Around Foxcotte
Our customers here include homes close to St Thomas, Portway Infant School and Harrow Way Community School, among other places. The nearest railway station is Andover station, about 1.2 miles south-east. A little further out are Andover Museum (1.7 miles south-east) and Andover War Memorial Hospital (0.9 miles south-east). For a walk, there is Mill Lake and Anton Lakes.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not use the bath until it has fully cured
- Store bottles off the bath
- Wash away dyes and oils after use
- Fix dripping taps quickly
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
