Hampshire · England
Bath re-enamelling & resurfacing in Penton Mewsey, Hampshire
Bath re-enamelling in Penton Mewsey without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A dull, rough surface that won’t come clean
Bath re-enamelling in Penton Mewsey, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include thin, worn enamel in places and an outdated colour you’d like to change, across Victorian roll-tops, basins & shower trays and acrylic baths.
All of our repairs are guaranteed for twelve months in Penton Mewsey and everywhere else. If something goes wrong with the work, we come back.
- Location
- Penton Mewsey (SP11)
- Area hub
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Penton Mewsey
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people contact us when they notice something like this:
- An outdated colour you’d like to change
- Stains that will not shift
- Thin, worn enamel in places
- An old resurfacing that is failing
What your quote should include
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- If travel is included in the price
- What happens if they find more damage
Where we work around Penton Mewsey
Penton Mewsey is about 2 miles north-west of Andover, in Hampshire. From the centre of Penton Mewsey to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Penton Mewsey to London (about 65 miles away).
We work across SP11. Local streets include Chalkcroft Lane, Trinity Rise and Newbury Hill. If you’re just outside Penton Mewsey, we cover Penton Grafton (1 mile south-west), Penton Corner (1 mile south), Foxcotte (1 mile east), Charlton (1 mile east) and Clanville (1 mile north-west). We also work in nearby towns such as Winchester (15 miles south-east), Hyde (14 miles south-east), Tidworth (6 miles west), Weeke (14 miles south-east), Stanmore (15 miles south-east) and Ludgershall (4 miles north-west).
Landmarks near Penton Mewsey
Typical jobs here are in homes near White Hart Public House, Harrow Way Community School and Holy Trinity Church, among other places. For rail, the closest station is Andover station, roughly 1.9 miles south-east. Well-known places in the area include Andover Museum (2.5 miles south-east) and Ludgershall Castle (4.7 miles north-west). Open spaces near Penton Mewsey include Anton Lakes and Mill Lake.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Prices start from £350. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- One price list for the entire UK
- Colour-matched on site
- CHAS, Constructionline and SafeContractor accredited
See our prices page or guide to resurfacing and replacement costs.
Penton Mewsey questions
Do you cover Penton Mewsey?
Yes. We cover the whole UK and come to Penton Mewsey and the rest of Hampshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and you will get one combined price.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Prices and what affects them
Prices start from £350. There’s no area surcharge for Penton Mewsey. The price reflects:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Places near Penton Mewsey
Also in Penton Mewsey
Landlords, agents and businesses in Penton Mewsey
Landlords, letting agents and housing providers in Penton Mewsey use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Open a window if you can
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What we can’t put right
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
