Lincolnshire · England
Bath re-enamelling & resurfacing in Frampton, Lincolnshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Frampton. Send photos for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- A roll-top that is seen better days
Bath re-enamelling at your home in Frampton
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people contact us are a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Frampton (PE20)
- County
- Lincolnshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Towns and villages near Frampton
Also in Frampton
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Prices start from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Work done at your home or business
- Most jobs done in one visit
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
See our pricing or resurfacing vs replacement cost guide.
Questions from Frampton
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
How do I get a price for bath re-enamelling in Frampton?
Prices start from £350. We give a fixed price from your pictures. Send a close-up and a picture of the whole item and your postcode.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you’ll get one combined price.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
Generally one day, with the bath ready the following day. A badly pitted bath can need a second day.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Frampton
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Frampton and nearby
Frampton is about 3 miles south of Boston, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Frampton is one of 732 places in Lincolnshire where we work.
Here we cover the PE20 postcode area. You will find streets such as London Road, Lenton Way and Middlegate Road West, all of which we cover. Neighbouring places we cover include Kirton (1 mile south-west), Frampton West End (1 mile north-west), Wyberton (1 mile north), Kirton End (2 miles north-west) and Sandholme (2 miles south-east). Further out, we also cover Boston (3 miles north), Spalding (11 miles south-west), Holbeach (9 miles south), Pinchbeck (10 miles south-west), Witham (3 miles north) and Long Sutton (12 miles south-east).
What’s near Frampton
Our customers here include homes close to Kirton Primary School, Thomas Middlecott Academy and Church of St Peter and St Paul and the streets around them. The closest station to Frampton is Boston station, roughly 3.1 miles north. A little further out are Pilgrim Hospital (4.2 miles north) and Frampton Castle (0.8 miles east). For a walk, there is RSPB Frampton Marsh.
Aftercare tips
After the repair has cured, a few habits help it last:
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
- Don’t use the bath until it has fully cured
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- How hard the colour is to match
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
When you take your photos, a few simple things make all the difference:
- Natural light rather than flash
- A clear, close picture of the problem area
- Any details about the material
- A photo taken from further back
Most customers in Frampton get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
How it works
We work cleanly and quietly. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
