Gloucestershire · England
Bath re-enamelling & resurfacing in Frampton on Severn, Gloucestershire
Local bath re-enamelling for Frampton on Severn: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Stains that will not shift
- Thin, worn enamel in places
Bath re-enamelling at your home in Frampton on Severn
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, and can be used again the next day. We are often asked to fix a bath in a colour that no longer suits and brown or grey marks that don’t clean off, on acrylic baths, cast iron baths and pressed steel baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- Frampton on Severn (GL2)
- Region
- Gloucestershire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
- How much damage there is
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
Phone pictures are fine. Just make sure we can see:
- A close-up of the damage, in focus
- Natural light rather than flash
- Any details about the material
- Any earlier repairs or coatings
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Nearby places to Frampton on Severn
More services for Frampton on Severn
How to care for the repair
Most damage we see is avoidable. A few tips:
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Frampton on Severn and the surrounding area
Frampton on Severn is about 5 miles south-west of Quedgeley, in Gloucestershire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Frampton on Severn is one of 470 towns and villages in Gloucestershire where we work. You can also see our page for Birmingham, about 52 miles away.
Jobs in GL2 are booked in the same way as anywhere else. Streets in the area include The Street, The Oval and Bridge Road, all of which we cover. Frampton on Severn is on the B4071, so it’s easy for us to reach. Neighbouring places we cover include Saul (1 mile north), Upper Framilode (1 mile north), Framilode (1 mile north), Whitminster (2 miles east) and Overton (2 miles north-west). We also work in nearby towns such as Cheltenham (15 miles north-east), Gloucester (8 miles north-east), Stroud (6 miles east), St Paul's (15 miles north-east), Lansdown (15 miles north-east) and Brockworth (10 miles north-east).
Near you in Frampton on Severn
We visit homes around The Bell Inn, Lakefield CofE Primary School and Church of St James and the streets around them. The nearest railway station is Cam & Dursley station, roughly 3.8 miles south of the centre. Well-known places in the area include Haresfield Mount (4 miles east) and Standish Hospital (4.3 miles east). Green spaces nearby include WWT Slimbridge and Haresfield Beacon.
Frampton on Severn: your questions answered
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we will ask for another angle.
How much does bath re-enamelling cost in Frampton on Severn?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Gloucestershire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Frampton on Severn as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Steel that has corroded right through
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why Frampton on Severn clients choose us
- Dust sheets down, tidy finish
- A fixed quote before you book
- Colour-matched on site
- Technicians who travel to you, UK-wide
Take a look at our full price list or bath cost comparison.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
- Let us know which floor the room is on
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
