Greater London · England

Bath Re-enamelling for Friday Hill homes

Local bath re-enamelling for Friday Hill: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Friday Hill?

Bath re-enamelling in Friday Hill, done in place

Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and people most frequently call us about thin, worn enamel in places and a coloured bath you want in white.

You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Friday Hill (E4, IG8, IG9)
Area hub
Greater London
Cover
A year, on every repair
Price
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Our work in Friday Hill

Friday Hill is about 1 mile east of Chingford, in Greater London. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 764 towns and villages across Greater London. Our jobs stretch from Friday Hill to London (about 10 miles away).

All of E4, IG8 and IG9 is covered, from the main roads to the quietest streets. We regularly work on streets such as Weale Road, Hatch Lane and The Avenue and the roads around them. You’ll find Friday Hill on the A1009, which makes it straightforward to reach. We also cover the places around Friday Hill: Chingford Hatch (1 mile south-west), Chingford (1 mile west), Monkhams (1 mile east), Chingford Mount (1 mile west) and Waltham Forest (1 mile north-east). Larger places within reach include London (10 miles south-west), City of Westminster (10 miles south-west), Marylebone (10 miles south-west), Kensington (12 miles south-west), St Pancras (9 miles south-west) and Shoreditch (8 miles south-west).

Around Friday Hill

In Friday Hill, that means homes near Normanhurst School, Heathcote School & Science College and The Highams Park, among other places. Also close by are Longshaw Primary School (within half a mile west), Kings Head pub (0.8 miles north-west) and Church of St Peter and St Paul (0.7 miles north-west). The closest station to Friday Hill is Chingford station, roughly 0.8 miles north. A little further out are Wanstead Hospital (2.7 miles south) and The Epping Forest Museum (1 mile north-east). For a walk, there’s Ainslie Wood and Pole Hill.

  • Other local spots include Buckhurst Hill East (1.7 miles east)
Map of Friday Hill © OpenStreetMap contributors

When to call us in Friday Hill

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

If you can see any of these, send us a photo:

  • Chips and rust in more than one place
  • A peeling or bubbling previous coating
  • Stains that won’t shift
  • An outdated colour you’d like to change

Comparing quotes

  • Whether cleaning and preparation are in the price
  • How your room will be protected
  • Who will actually do the work
  • What aftercare is recommended

Our hiring checklist

Landlord and trade work in Friday Hill

Landlords, letting agents and housing providers in Friday Hill use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

When we would advise against a repair

We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • Problems we can’t see until an old finish comes off
  • A cast iron or steel bath that is cracked right through
  • A bath that is rusted through

If in doubt, send photos and we will say what we think.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths

How to care for the repair

To keep it looking its best for years:

  • Avoid suction-cup mats
  • Store bottles off the bath
  • Do not use the bath until it has fully cured
  • Dry the bath after use to stop limescale

Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

What bath re-enamelling costs

Prices start from £350. We charge the same across the UK, including Friday Hill. What changes the price is:

  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • Whether we combine several jobs
  • Any earlier repairs that need removing first

We charge the same wherever you are, so there is no premium for Friday Hill. What changes the price is the job itself: the material, the amount of damage and how many items.

How to get a fixed quote

We price nearly every job from photos. This is what to send:

  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.

What happens on the day

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Mention if the room is upstairs or in a flat
  • Make sure the room can be ventilated

Ask for a price

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Read more

Friday Hill questions

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there a smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your E4 postcode.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Can a failed resurfacing be redone?

Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Should you replace it?

A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Friday Hill

  • A year’s guarantee on all work
  • Same prices wherever you are
  • Nothing taken out or refitted
  • Dust sheets down, tidy finish

Take a look at our prices page and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.