Greater London · England
Bath Re-enamelling in Furzedown
Bath re-enamelling in Furzedown without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Stains that won’t shift
Bath re-enamelling at your home in Furzedown
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. Whether it’s a coating lifting around the plughole and wear marks under the taps, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Furzedown (SW16, SW17, CR4)
- Area hub
- Greater London
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a full day from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Make sure the area is dry
Get a quote
To get a price, send two or three pictures through our quote form or call us. We will say straight away if a repair is the right fix.
Related advice
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- What kind of damage it is
- What the surface is made of
- Unusual colours or finishes
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from photos
Phone pictures are fine, there is no need for anything special. Make sure they show:
- Where you are, by postcode
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
If you are in Furzedown and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Towns and villages near Furzedown
More services for Furzedown
Common questions in Furzedown
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we will ask.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Where we work around Furzedown
Furzedown is about 3 miles east of Wimbledon, in Greater London. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Furzedown is one of 764 places in Greater London where we work. You can also see our page for London, about 6 miles away.
Our technicians cover all of the SW16, SW17 and CR4 postcode area and the streets around it. Streets in the area include Deal Road, Links Road and Seely Road, all of which we cover. Furzedown is on the A216, which makes it straightforward to reach. Nearby, we also work in Streatham Park (1 mile north-east), Tooting (1 mile west), Tooting Bec (1 mile west), Streatham (1 mile east) and Colliers Wood (1 mile south-west). Larger places within reach include London (6 miles north-east), City of Westminster (6 miles north), Marylebone (6 miles north), Kensington (6 miles north-west), St Pancras (7 miles north) and Shoreditch (8 miles north-east).
What’s near Furzedown
Typical jobs here are in homes near Furzedown Secondary School, St Paul's Church and Graveney School and the streets around them. Nearby too are The Holland Tringham pub (0.9 miles north-east), Figge's Marsh (0.9 miles south-west) and Penwortham Primary School (within half a mile south-east). Furzedown’s nearest station is Tooting station, roughly 0.6 miles south-west. Nearby you’ll also find London Sewing Machine Museum (0.9 miles north-west) and Southside Wandsworth (2.9 miles north-west). For a walk, there is Battersea Park Lake and Knight's Hill.
- Local facilities include St Leonard's (0.8 miles north-east)
Do you need bath re-enamelling in Furzedown?
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
Get in touch if you’ve noticed any of these:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
Before booking anyone
- How changes to the job are handled
- When it can be used again
- How long the guarantee is and what it covers
- Who will actually do the work
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
What a repair cannot fix
A repair isn’t always the answer, and we will tell you before we start. Repairs won’t solve:
- A metal bath with a through crack
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
Send us photos and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
