Fife · Scotland
Bath re-enamelling & resurfacing in Gateside, Fife
We travel to Gateside for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our bath re-enamelling in Gateside
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. If you’re dealing with an old resurfacing that’s failing and stains that won’t shift, we can usually put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Gateside (KY14)
- Region
- Fife
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Gateside?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
Why choose Surface Doctor in Gateside
- Accredited with CHAS, Constructionline and SafeContractor
- Normally one visit, start to finish
- Honest advice, even when it means no job
- Rooms protected and left tidy
See our prices page or guide to resurfacing and replacement costs.
More services for Gateside
Our work in Gateside
Gateside is about 8 miles north-west of Glenrothes, in Fife. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover all 133 towns and villages in Fife, from the larger towns to small villages. Our nearest city page is Edinburgh, about 23 miles away.
All of KY14 is within our area, from the main roads to the quietest streets. From Station Road, Bower Park and Main Road or a nearby road, a technician can come to you. Close by, we cover Strathmiglo (2 miles east), Glenlomond (3 miles south), Duncrievie (3 miles west), Glenfarg (3 miles west) and Wester Balgedie (3 miles south). We also work in nearby towns such as Dunfermline (14 miles south), Kirkcaldy (11 miles south-east), Glenrothes (8 miles south-east), Leven (13 miles east), Cowdenbeath (11 miles south) and Dysart (12 miles south-east).
Around Gateside
Our clients here include homes close to Edenshead Church and the streets around them. Well-known places in the area include Michael Bruce Cottage Museum (3.7 miles south) and Balvaird Castle (1.7 miles north-west). Not far away are Cash Loch and West Lomond.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
Ask for a price
Send us a photo of the damage and one of the entire item, with your KY14 postcode, and we’ll come back with a fixed quote.
Related advice
FAQs for Gateside
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Do you cover the whole of Fife?
The entire UK, including all of Fife. Send your postcode with your photos and we will confirm dates.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we are called out for in Gateside
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
If you can see any of these, send us a picture:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- An outdated colour you’d like to change
- Several chips and rust patches
Comparing quotes
- Whether they match the colour on site
- What prep work is covered
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- Holes rusted through the metal
Send us pictures and we will tell you honestly.
Materials we work on in Gateside
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
