Perth and Kinross · Scotland
Bath Re-enamelling for Duncrievie homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Duncrievie. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Wear marks under the taps
Bath re-enamelling at your home in Duncrievie
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We are frequently asked to fix worn patches where water runs and sits and an outdated colour you’d like to change, on cast iron baths, pressed steel baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Duncrievie (PH2)
- Area hub
- Perth and Kinross
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Duncrievie
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Do you cover the entire of Perth and Kinross?
The entire UK, including all of Perth and Kinross. Just include your postcode and we will confirm dates.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. A badly pitted bath can need a second day.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Aftercare tips
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Our work in Duncrievie
Duncrievie is about 9 miles south of Perth, in Perth and Kinross. Wherever you are in the PH2 postcode area, we come to you. Duncrievie is one of 107 places in Perth and Kinross where we work. Our jobs stretch from Duncrievie to Edinburgh (about 24 miles away).
Postcode districts we cover here: PH2. Close by, we cover Glenfarg (1 mile north), Gateside (3 miles east), Milnathort (3 miles south), Glenlomond (3 miles south-east) and Wester Balgedie (4 miles south-east). Larger places within reach include Perth (9 miles north), Auchterarder (12 miles west), Letham (10 miles north), Scone (10 miles north), Tulloch (10 miles north) and Oakbank (9 miles north).
Near you in Duncrievie
Our clients here include homes close to Arngask Library and Arngask Church and the streets around them. Further afield, we also cover the area around Balvaird Castle (2.5 miles north-east) and Bridge of Earn Hospital (5.3 miles north). For a walk, there’s Loch Leven National Nature Reserve and West Lomond.
Landlords, agents and businesses in Duncrievie
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
For anyone letting property in or around Duncrievie, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Towns and villages near Duncrievie
Other services in Duncrievie
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Do you need bath re-enamelling in Duncrievie?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- Wear marks under the taps
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
What your quote should include
- How soon you can use it again
- The length of the guarantee and what it covers
- What protection goes down before work starts
- Whether they match the colour on site
What we can’t put right
Some jobs aren’t right for a repair, for example:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- A bath split right through the body
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Duncrievie
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Duncrievie clients choose us
- Most jobs done in one visit
- Free fixed quotes from pictures
- Everything repaired in place
- Straight answers about what a repair can do
See our pricing and resurfacing vs replacement cost guide.
What happens on the day
We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a full day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Tell us about any previous repairs or coatings
How to get a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
