Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Glenlomond, Perth and Kinross
Our repair technicians come to Glenlomond for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
How we handle bath re-enamelling in Glenlomond
We do not move the bath, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. If you are dealing with thin, worn enamel in places and lots of chips and rust spots, we can normally put it right, on basins & shower trays, cast iron baths and acrylic baths alike.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Glenlomond (KY13)
- Region
- Perth and Kinross
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Landlords, agents and businesses in Glenlomond
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Nearby places to Glenlomond
Also in Glenlomond
Do you need bath re-enamelling in Glenlomond?
Many baths we resurface have simply been well used. The body of the bath is typically perfectly sound.
People typically call us when they notice something like this:
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- Worn patches where water runs and sits
Before booking anyone
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- Whether they match the colour on site
Should you replace it?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Glenlomond
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- One visit for most repairs
See our full price list and bath cost comparison.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Ensure the area is dry
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and you’re under no obligation.
Related advice
Common questions in Glenlomond
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
What happens next?
We review the photos and send a fixed quote with dates.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
Prices and what affects them
Resurfacing from £350. We price every job individually. The main factors are:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- The type of damage
- The material and finish
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
Most quotes are done from pictures alone. To help us price it:
- Details of any past repairs
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Upload pictures of the damage and one of the whole item, and tell us you’re in Glenlomond, and we’ll come back with a fixed quote.
Aftercare tips
To keep it looking its best:
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- Store bottles off the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Glenlomond and the surrounding area
Glenlomond is about 7 miles west of Glenrothes, in Perth and Kinross. We agree a date that works for you, and you’ll know when to expect us, so there’s no waiting around. We work in all 107 towns and villages in Perth and Kinross. You can also see our page for Edinburgh, about 20 miles away.
Postcode districts we cover here: KY13. We also cover the places around Glenlomond: Wester Balgedie (1 mile south-west), Kinnesswood (1 mile south-east), Scotlandwell (2 miles south-east), Gateside (3 miles north) and Milnathort (3 miles west). We also work in nearby towns such as Perth (12 miles north), Auchterarder (15 miles west), Kinross (4 miles west), Letham (13 miles north-west), Scone (13 miles north) and Tulloch (14 miles north).
Near you in Glenlomond
Locally, our jobs take us to homes close to Easter Balgedie church and the streets around them. Further afield, we also cover the area around Michael Bruce Cottage Museum (1.2 miles south-east) and Loch Leven Castle (2.7 miles south-west). Green spaces nearby include Loch Leven National Nature Reserve and Loch Leven.
About our accreditations · Every repair comes with a one-year guarantee.
