Neath Port Talbot · Wales
Bath Re-enamelling for Goytre homes
Bath re-enamelling in and around Goytre: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
What affects the price in Goytre
Prices start from £350. There’s no area surcharge for Goytre. The price reflects:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The material
- How many areas need work
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A photo taken from further back
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Bath re-enamelling at your home in Goytre
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include lots of chips and rust spots and a dull, rough surface that won’t come clean, in Victorian roll-tops, basins & shower trays and acrylic baths.
Big or small, you get the same one-year guarantee in Goytre and across Neath Port Talbot.
- Area
- Goytre (SA13)
- Area hub
- Neath Port Talbot
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Goytre
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Goytre, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Goytre: your questions answered
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is there any odour?
There may be a mild smell during the work.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you cover the whole of Neath Port Talbot?
The entire UK, including all of Neath Port Talbot. Send your postcode with your pictures and we will confirm dates.
What we are called out for in Goytre
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- Several chips and rust patches
Questions to ask before booking
- How soon you can use it again
- Who turns up on the day
- How your room will be protected
- Aftercare advice
Our work in Goytre
Goytre is about 2 miles east of Port Talbot, in Neath Port Talbot. Wherever you are in the SA13 postcode area, we carry out the work at your property. Goytre is one of 100 towns and villages in Neath Port Talbot we cover.
Our visits in SA13 work the same way as everywhere else we cover. Local streets include Goytre Close, Goytre Road and Parc Pen-y-Bryn. Neighbouring places we cover include Pen-y-cae (1 mile west), Tai-Bach (1 mile south-east), Taibach (1 mile south-west), Felindre (1 mile north-west) and Port Talbot (2 miles west). Larger places within reach include Neath (5 miles north-west), Mount Pleasant (5 miles north-west), Sandfields West (3 miles west), Pontardawe (10 miles north-west), Baglan (3 miles north-west) and Glyn-neath (12 miles north-east).
Local landmarks in Goytre
We visit homes around Glan Afan Comprehensive School, Somerset Arms and Eastern Primary School, among other places. For rail, the closest station is Port Talbot Parkway station, roughly 1.2 miles west. Further afield, we also cover the area around Neath Port Talbot Hospital (2 miles west) and Aberafan Centre (1.4 miles west). For a walk, there is Kenfig Burrows slack and Mynydd Emroch - Craig Emroch.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Also in Goytre
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Goytre. The job itself decides the price: the material, the amount of damage and how many items.
Why Goytre clients choose us
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Usually one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list or bath cost comparison.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
