Greater London · England
Bath Re-enamelling for Grahame Park homes
Bath re-enamelling for Grahame Park, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- Enamel that’s lost its shine and feels rough
About our bath re-enamelling in Grahame Park
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include a period or roll-top bath worth keeping and several chips and rust patches, in Victorian roll-tops, cast iron baths and acrylic baths.
We stand behind the work with a one-year guarantee.
- Area
- Grahame Park (NW9, NW7, NW4)
- County
- Greater London
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Grahame Park. The price comes down to:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- How hard the colour is to match
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
Phone photos are fine, there’s no need for anything special. Make sure they show:
- The material, if you know it
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Towns and villages near Grahame Park
What else we do in Grahame Park
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What happens on the day
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes a full day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Related advice
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common questions in Grahame Park
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you redo someone else’s repair?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you cover Grahame Park?
Yes, we do. We send a technician to Grahame Park for every job, and the price is the same as everywhere else.
Which areas do you work in?
Across the UK, and that includes Grahame Park. Our prices are the same everywhere.
Work for landlords and builders
Landlords, letting agents and housing providers in Grahame Park use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
When we would advise against a repair
In fairness, some problems need a different fix:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Materials we repair
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Common problems we fix in Grahame Park
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
- Several chips and rust patches
- Worn patches where water runs and sits
What to look for in a quote
- If travel is included in the price
- How the colour is matched
- What protection goes down before work starts
- Aftercare advice
Our work in Grahame Park
Grahame Park is about 1 mile south-east of Burnt Oak, in Greater London. We visit homes and businesses in Grahame Park, so there’s no workshop to go to. We work in 764 places across Greater London, from the larger towns to small villages. We work right across the region, from Grahame Park to London (9 miles away).
Here we cover the NW9, NW7 and NW4 postcode area. Whether you live on Hall Lane, Booth Road and Harrier Road or a nearby road, we can come to you. Being close to the M1, Grahame Park is easy for our technicians to reach. Neighbouring places we cover include Burnt Oak (1 mile north-west), Mill Hill (1 mile north), The Hale (2 miles north-west), Edgware (2 miles north-west) and Little Stanmore (2 miles west). We also work in nearby towns such as London (9 miles south-east), City of Westminster (7 miles south-east), Marylebone (7 miles south-east), Kensington (7 miles south), St Pancras (7 miles south-east) and Shoreditch (9 miles south-east).
Near you in Grahame Park
We visit homes around St Augustine Grahame Park, Blessed Dominic Catholic Primary School and Sunny Hill Park. Nearby too are St James' Catholic High School (within half a mile south-west), The Greyhound pub (0.9 miles south-east) and Dollis Junior School (1 mile north-east). The closest station to Grahame Park is Mill Hill Broadway station, about 0.9 miles north. Well-known places in the area include Municipal Borough of Hendon (1 mile south-east) and Edgware Community Hospital (1.3 miles west). Not far away are Copthall South Fields and Parliament Hill.
About our accreditations · Every repair comes with a one-year guarantee.
