Greater London · England
Bath Re-enamelling in The Hale
Bath re-enamelling across The Hale and nearby, generally in one visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Bath re-enamelling in The Hale, done in place
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are wear marks under the taps and a dull, rough surface that won’t come clean.
All of our repairs are guaranteed for twelve months in The Hale and everywhere else. We return to put right any problem with the work.
- Location
- The Hale (HA8, NW7)
- Area hub
- Greater London
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
The Hale: your questions answered
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Which areas do you work in?
Everywhere in the UK, The Hale included. Travel is included in the price.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Also near The Hale
Other services in The Hale
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- One price list for the whole UK
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Work done at your home or business
Take a look at our full price list and guide to resurfacing and replacement costs.
When to call us in The Hale
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
These are the problems we’re asked about most:
- An outdated colour you’d like to change
- Stains that will not shift
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Questions to ask before you book
- How the room is protected while they work
- How long it needs to cure
- Whether the price covers travel
- Whether the price is fixed and includes VAT
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Prices and what affects them
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How many areas need work
- Whether we combine several jobs
The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- Details of any past repairs
- Natural light rather than flash
- One sharp close-up of the damage
- The material, if you know it
Upload pictures of the damage and a wider shot of the entire item, with your HA8 postcode, and we will reply with a fixed quote.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Landlord and trade work in The Hale
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around The Hale, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Covering The Hale
The Hale is about 1 mile north of Burnt Oak, in Greater London. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. The Hale is one of 764 towns and villages in Greater London where we work. Our nearest city page is London, about 11 miles away.
Our repair technicians cover all of HA8 and NW7. Jobs here include addresses on Hale Lane, Farm Road and Dean's Lane. With the A5100 close by, The Hale is easy for our technicians to reach. Nearby, we also work in Edgware (1 mile west), Broadfields Estate (1 mile north-west), Burnt Oak (1 mile south), Mill Hill (1 mile east) and Edgware Bury (1 mile north-west). Further out, we also cover London (11 miles south-east), City of Westminster (9 miles south-east), Marylebone (9 miles south-east), Kensington (9 miles south), St Pancras (9 miles south-east) and Shoreditch (10 miles south-east).
Local landmarks in The Hale
Around The Hale, we work in homes near Stoneyfields Park, Mathilda Marks-Kennedy Jewish Primary School and St Martin's School Brentwood, among other places. Nearby too are The Northgate School (1.1 miles south-west), John Keble Church (within half a mile south) and Rising Sun pub (0.9 miles north-east). The nearest railway station is Mill Hill Broadway station, about 0.7 miles south-east of the centre. Other landmarks nearby include Municipal Borough of Hendon (2.6 miles south-east) and Broadwalk Centre (0.8 miles south-west). Green spaces nearby include Mill Hill Old Railway Nature Reserve and Darland's Lake.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
