Dorset · England
Bath re-enamelling & resurfacing in Grove, Dorset
Our technicians come to Grove for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that is seen better days
- Lots of chips and rust spots
Bath re-enamelling in Grove, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the next day. Nothing is disconnected or removed. If you are dealing with brown or grey marks that don’t clean off and a coloured bath you want in white, we can help.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Grove (DT5)
- Area hub
- Dorset
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Grove
Grove is about 5 miles south of Weymouth, in Dorset. Whether you’re in the middle of Grove or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 462 towns and villages across Dorset.
Every address in DT5 is covered. Whether you live on Grove Road, Rufus Way and Victoria Road or a nearby road, we can come to you. Close by, we cover Easton (1 mile south-west), Portland (1 mile west), Weston (1 mile south-west), Fortuneswell (1 mile north-west) and Castletown (1 mile north-west). Larger places within reach include Weymouth (5 miles north), Dorchester (11 miles north), Rodwell (5 miles north-west), Fordington (11 miles north), Melcombe Regis (5 miles north) and Greenhill (5 miles north).
What’s near Grove
Typical jobs here are in homes near St. Peter's Church, St George's Community Primary School and The George Inn. You will also find Atlantic Academy Portland (1.9 miles south-west) and Victoria Gardens (1.2 miles north-west). Grove’s nearest station is Weymouth station, about 4.7 miles north. Nearby you’ll also find Castletown D-Day Centre (1.4 miles north-west) and Portwey Hospital (4.1 miles north-west).
- Parks and local facilities nearby include Weymouth and Portland (1.7 miles north-west)
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
FAQs for Grove
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is it safe with children and pets around?
Just keep them out of the work area. We will tell you when the room can be used again.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Landlord and trade work in Grove
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Honest limits
In fairness, there are a few things a repair will not fix:
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Grove. The price depends on:
- Where the damage is and how we get to it
- What the surface is made of
- How hard the colour is to match
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- Any earlier repairs or coatings
- Any details about the material
- A photo taken from further back
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It typically takes the best part of a day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep a parking space free if you can
- Open a window if you can
- Mention if the room is upstairs or in a flat
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Grove. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Colour mixed on the day to match
- One price list for the whole UK
- One visit for most repairs
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
Towns and villages near Grove
Also in Grove
Aftercare tips
How the surface is treated afterwards matters:
- A dripping tap should be fixed promptly
- Have chips seen to early
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
