Dorset · England
Bath Re-enamelling in Corscombe
Problem with your bath in Corscombe? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A dull, rough surface that will not come clean
About our bath re-enamelling in Corscombe
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We are often asked to fix brown or grey marks that don’t clean off and wear marks under the taps, on Victorian roll-tops, cast iron baths and acrylic baths.
Every repair comes with a one-year guarantee.
- Area
- Corscombe (DT2)
- County
- Dorset
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Corscombe. The price reflects:
- What kind of damage it is
- The material and finish
- Unusual colours or finishes
- How many areas need work
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Phone photos are fine. Just ensure we can see:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- A picture taken from further back
- Where you are, by postcode
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
- Point us to the nearest place to park
How to get a price
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Corscombe, and we will come back with a fixed quote.
Related advice
Looking after it afterwards
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Clean with a soft cloth and mild detergent
- Avoid suction-cup mats
Use mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Corscombe: your questions answered
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Are there extra charges for Corscombe?
Travel is included in the price, with the same prices everywhere we work.
What we can’t put right
Some jobs are not right for a repair, including:
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
Send us photos and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Covering Corscombe
Corscombe is about 7 miles south of Yeovil, in Dorset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Corscombe is one of 462 towns and villages in Dorset we cover.
Here we cover the DT2 postcode area. That includes homes on High Street, Fudge Hill and Linhay. If you’re just outside Corscombe, we cover West Chelborough (2 miles east), Benville (2 miles south-east), Halstock (2 miles north-east), Netherstoke (3 miles north-east) and Pendomer (3 miles north). Larger places within reach include Dorchester (14 miles south-east), Bridport (8 miles south), Sherborne (10 miles north-east), Fordington (14 miles south-east), Lyme Regis (14 miles south-west) and Beaminster (3 miles south-west).
Near you in Corscombe
In Corscombe, that means homes near Church of St Mary and the streets around them. The closest station to Corscombe is Crewkerne station, about 4.4 miles north-west. Nearby you will also find Mohun Castle (2.9 miles west) and Beaminster Museum (3.4 miles south-west). For a walk, there’s Toller Down.
Also near Corscombe
What else we do in Corscombe
Do you need bath re-enamelling in Corscombe?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Most people contact us when they notice one of these:
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- A roll-top that is seen better days
What your quote should include
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- Whether there are any call-out or travel charges
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
