Lincolnshire · England
Bath Re-enamelling for Halton Fenside homes
Full bath re-enamelling and resurfacing for homes and businesses in Halton Fenside and across Lincolnshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Halton Fenside
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are a bath that stays dull however much you clean it and an old resurfacing that’s failing.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Where
- Halton Fenside (PE23)
- Region
- Lincolnshire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Halton Fenside
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Customers normally contact us about:
- Staining under the taps and around the waste
- Several chips and rust patches
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Before you book anyone
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
Repairing versus replacing in Halton Fenside
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Every repair guaranteed for a year
- Rooms protected and left tidy
- Most jobs done in one visit
- Free fixed quotes from pictures
See our pricing or guide to resurfacing and replacement costs.
Nearby places to Halton Fenside
Other services in Halton Fenside
Landlords, agents and businesses in Halton Fenside
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Where we work around Halton Fenside
Halton Fenside is about 9 miles west of Skegness, in Lincolnshire. Wherever you are in the PE23 postcode area, we carry out the work at your property. Halton Fenside is one of 732 places in Lincolnshire we cover.
Jobs in PE23 work the same way as everywhere else we cover. Whether you live on Halton Fenside, Pinfold Lane and Fen Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Little Steeping (1 mile south-east), Great Steeping (1 mile north-east), Halton Holegate (1 mile north), Firsby (2 miles east) and Ashby by Partney (2 miles north). We also work in nearby towns such as Boston (13 miles south-west), Skegness (9 miles east), Horncastle (11 miles north-west), Mablethorpe (14 miles north), Woodhall Spa (14 miles west) and Witham (13 miles south-west).
Landmarks near Halton Fenside
Our clients here include homes close to King Edward VI Academy, Halton Holegate CofE Primary School and Church of St Andrew and the streets around them. The closest station to Halton Fenside is Thorpe Culvert station, about 3.5 miles south-east of the centre. Nearby you’ll also find Dalby Old Hall Holt (4.1 miles north).
What happens on the day
We work cleanly and quietly. Protection goes down first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
Getting a price
Most customers in Halton Fenside get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Keep toiletries on a shelf rather than in the bath
- Have chips seen to early
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs right away
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- Where the damage is and how we get to it
- What the surface is made of
- Doing more than one item at once
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
When you take your photos, a few simple things make all the difference:
- The material, if you know it
- A photo taken from further back
- Natural light rather than flash
- The postcode, so we can plan the visit
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
FAQs for Halton Fenside
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
How long will the bath be out of use?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
