Kent · England
Bath re-enamelling & resurfacing in Ham, Kent
Full bath re-enamelling and resurfacing at your home in Ham, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that will not shift
- A bath in a colour that no longer suits
Why repair rather than replace?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
What you get with us
- Most jobs done in one visit
- Dust sheets down, tidy finish
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling in Ham, done in place
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for a period or roll-top bath worth keeping and chips and rust in more than one place, across pressed steel baths, Victorian roll-tops and basins & shower trays.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Ham (CT14)
- County
- Kent
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How the visit works
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
How to get a price
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Advice
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Aftercare tips
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
What affects the price in Ham
Resurfacing from £350. There’s no area surcharge for Ham. What changes the price is:
- The size and number of damaged areas
- Doing more than one item at once
- How easy the damage is to reach
- The material
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
It only takes a minute to photograph the damage. Try to send:
- What it’s made of, if you know
- Your postcode, so we can check dates
- Natural light rather than flash
- Something in shot to show the size
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and you are under no obligation.
Your questions about bath re-enamelling in Ham
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can you do the outside of a roll-top?
Yes. Inside and out.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
What else we do in Ham
About Ham
Ham is about 3 miles north-west of Deal, in Kent. Jobs in Ham are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Ham is one of 922 towns and villages in Kent we cover. We work right across the region, from Ham to London (about 64 miles away).
Jobs in CT14 are booked in the same way as anywhere else. Nearby, we also work in Statenborough (1 mile north-west), Felderland (1 mile north), Worth (1 mile north-east), Marley (1 mile south-east) and Finglesham (1 mile south-east). Within a short drive, we also cover Canterbury (11 miles west), Margate (10 miles north), Dover (8 miles south), Folkestone (13 miles south-west), Ramsgate (7 miles north-east) and Broadstairs (9 miles north-east).
Near you in Ham
In Ham, that means homes near Church of St George, Worth Primary School and Ham Fen. Also close by are Sandwich Technology School (1.3 miles north) and The Blue Pigeons pub (1 mile north-east). Ham’s nearest station is Sandwich station, roughly 1.7 miles north. Well-known places in the area include Sandown Castle (3.1 miles east) and The Precinct Toy Collection (2.1 miles north). Open spaces near Ham include Monk's Wall nature reserve.
About our accreditations · Every repair comes with a one-year guarantee.
