Northumberland · England
Bath re-enamelling & resurfacing in Hampeth, Northumberland
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hampeth. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
Bath re-enamelling at your home in Hampeth
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s worn patches where water runs and sits and an original cast iron bath that needs restoring, we can typically put it right, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Hampeth (NE65)
- County
- Northumberland
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Hampeth and the surrounding area
Hampeth is about 13 miles north of Morpeth, in Northumberland. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Hampeth is one of 189 towns and villages in Northumberland we cover. We work right across the region, from Hampeth to Newcastle upon Tyne (about 26 miles away).
Our visits in NE65 are booked in the same way as anywhere else. Neighbouring places we cover include Shilbottle (2 miles north-east), Swarland (2 miles south), Alnwick (4 miles north), Felton (4 miles south) and North End (4 miles south-west). We also work in nearby towns such as Ashington (14 miles south-east), Morpeth (13 miles south), Amble (6 miles east), Newbiggin-by-the-Sea (14 miles south-east), Stakeford (14 miles south) and Rothbury (8 miles south-west).
Local landmarks in Hampeth
For rail, the closest station is Alnmouth station, roughly 4.1 miles north-east. A little further out are Edlingham Castle (4 miles west) and Alnwick Infirmary (3.8 miles north).
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Hampeth
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Keeping it looking good
It’s all simple stuff:
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Leave the bath for the full curing time before using it
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Landlord and trade work in Hampeth
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
If you manage property in Hampeth, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
Signs you need bath re-enamelling in Hampeth
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
If you can see any of these, send us a picture:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
Questions to ask before booking
- How changes to the job are handled
- What prep work is covered
- Who will actually do the work
- How to care for the finish
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- Access to the area
- Any earlier repairs that need removing first
- How many areas need work
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- Natural light rather than flash
- What it’s made of, if you know
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Upload photos of the damage and a wider shot of the entire item, with your NE65 postcode, and we will come back with a fixed quote.
Also near Hampeth
Also in Hampeth
Hampeth: your questions answered
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
About our accreditations · Every repair comes with a one-year guarantee.
