Lancashire · England
Bath re-enamelling & resurfacing in Haskayne, Lancashire
Damaged bath in Haskayne? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
About our bath re-enamelling in Haskayne
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and common reasons people contact us are an outdated colour you’d like to change and a coating lifting around the plughole.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Haskayne (L39)
- County
- Lancashire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
In fairness, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
What we are called out for in Haskayne
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- A coating lifting around the plughole
- Stains that will not shift
- An original cast iron bath that needs restoring
What to look for in a quote
- Whether the price covers travel
- When it can be used again
- How changes to the job are handled
- How the colour is matched
Covering Haskayne
Haskayne is about 3 miles west of Ormskirk, in Lancashire. From the centre of Haskayne to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Haskayne is one of 482 places in Lancashire where we work. Our jobs stretch from Haskayne to Liverpool (about 11 miles away).
Jobs in L39 are booked in the same way as anywhere else. From Chisnall Brook Close, Jackson Close and Moor Farm Close or a nearby road, a technician can come to you. Close by, we cover Barton (1 mile north-west), Downholland Cross (1 mile south-east), Halsall (1 mile north-east), Bangor's Green (2 miles north-east) and Aughton (3 miles south-east). We also work in nearby towns such as Chorley (15 miles north-east), Lytham St Anne's (13 miles north), Leyland (14 miles north-east), Skelmersdale (8 miles east), Ormskirk (3 miles east) and St Annes (13 miles north).
Near you in Haskayne
The nearest railway station is Town Green station, roughly 3.1 miles south-east of the centre. Further afield, we also cover the area around Ormskirk and District General Hospital (4 miles east).
Places near Haskayne
More services for Haskayne
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Haskayne. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Haskayne clients choose us
- Fixed prices from your pictures
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
Read our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- The colour and finish to match
- How many items we do on one visit
- Whether old repairs or coatings need taking off
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the pictures on your phone. Just ensure we can see:
- A close-up of the damage, in focus
- Natural light rather than flash
- What it’s made of, if you know
- Details of any past repairs
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Aftercare tips
After the repair has cured, a few habits help it last:
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- A quick wipe after use keeps limescale away
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
For landlords and businesses
We work for landlords, letting agents and housing providers in Haskayne as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
For anyone letting property in or around Haskayne, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Questions from Haskayne
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
What happens after I send pictures?
You will get a fixed quote back, typically with dates to choose from. You are under no obligation.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
About our accreditations · Every repair comes with a one-year guarantee.
