Norfolk · England
Bath re-enamelling & resurfacing in High Kelling, Norfolk
Local bath re-enamelling for High Kelling: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
Bath re-enamelling in High Kelling, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include chips and rust in more than one place and an old resurfacing that’s failing, in Victorian roll-tops, pressed steel baths and cast iron baths.
Every repair is covered by a one-year guarantee, wherever you are in Norfolk.
- Where
- High Kelling (NR25)
- Region
- Norfolk
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in High Kelling
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How many items we do on one visit
- How much damage there is
- Where the damage is and how we get to it
- The type of damage
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
Most customers in High Kelling get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why High Kelling customers choose us
- We will tell you if it’s not worth repairing
- Typically one visit, start to finish
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
Read our pricing or guide to resurfacing and replacement costs.
Places near High Kelling
Also in High Kelling
Landlords, agents and businesses in High Kelling
For anyone letting property in or around High Kelling, we’ll quote for several properties at once. Send photos for each one and we’ll price them together.
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Your questions about bath re-enamelling in High Kelling
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
How do I get a price for bath re-enamelling in High Kelling?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Signs you need bath re-enamelling in High Kelling
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
If you can see any of these, send us a picture:
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- Lots of chips and rust spots
- An old resurfacing that is failing
Questions to ask before you book
- What preparation is included
- Who turns up on the day
- How long the guarantee is and what it covers
- What happens if they find more damage
Our work in High Kelling
High Kelling is about 13 miles north-west of North Walsham, in Norfolk. Customers in High Kelling get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. High Kelling is one of 797 places in Norfolk where we work.
We work across NR25. We regularly work on streets such as Warren Close, Warren Road and Heathfield Close. Other places close to High Kelling include Holt (1 mile south-west), Bodham (2 miles east), Kelling (2 miles north), Weybourne (2 miles north) and Hempstead (2 miles south). We also work in nearby towns such as North Walsham (13 miles south-east), Sheringham (4 miles north-east), Cromer (7 miles east), Fakenham (13 miles south-west), Aylsham (10 miles south-east) and Wells-next-the-Sea (12 miles west).
What’s near High Kelling
For rail, the closest station is Sheringham station, about 4 miles north-east. Other landmarks nearby include Hunworth Castle Hill (3.5 miles south-west) and William Marriott Museum (under half a mile south-west). For a walk, there’s Kelling Heath.
About our accreditations · Every repair comes with a one-year guarantee.
