Norfolk · England
Bath re-enamelling & resurfacing in Kelling, Norfolk
We travel to Kelling for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Chips and rust in more than one place
- A coloured bath you want in white
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
- The material and finish
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
You can take the pictures on your phone, there is no need for anything special. Make sure they show:
- Your postcode, so we can check dates
- Details of any past repairs
- What it’s made of, if you know
- A wider photo showing the whole bath
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll say right away whether it can be repaired.
How we handle bath re-enamelling in Kelling
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We are frequently asked to fix a dull, rough surface that won’t come clean and several chips and rust patches, on cast iron baths, Victorian roll-tops and pressed steel baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Kelling (NR25)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which generally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Let us know which floor the room is on
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.
Advice
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- Colour-matched on site
See our full price list or resurfacing vs replacement cost guide.
Kelling questions
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Landlord and trade work in Kelling
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Places near Kelling
What else we do in Kelling
Kelling and nearby
Kelling is about 14 miles north-west of North Walsham, in Norfolk. We travel to clients in Kelling, so nothing has to leave your home. We work in 797 places in Norfolk.
All of NR25 is covered. Whether you live on The Street, Meadow Lane and Weynor Gardens or anywhere nearby, we can come to you. Being close to the A149, Kelling is easy for our technicians to reach. If you’re just outside Kelling, we cover Weybourne (1 mile east), Salthouse (1 mile north-west), High Kelling (2 miles south), Holt (3 miles south) and Bodham (3 miles south-east). Larger places within reach include North Walsham (14 miles south-east), Sheringham (4 miles east), Cromer (8 miles east), Fakenham (13 miles south-west), Aylsham (12 miles south-east) and Wells-next-the-Sea (11 miles west).
Landmarks near Kelling
Our customers here include homes close to The Pheasant Hotel, Church of St Mary and Kelling CE Primary School and the streets around them. For rail, the closest station is Sheringham station, about 4 miles east of the centre. A little further out are Hunworth Castle Hill (4.9 miles south) and William Marriott Museum (1.9 miles south). The countryside around Kelling includes Kelling Quags.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Fix dripping taps quickly
- Avoid suction-cup mats
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
