Norfolk · England
Bath re-enamelling & resurfacing in Weybourne, Norfolk
Bath re-enamelling across Weybourne and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Weybourne
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Typical jobs include worn patches where water runs and sits and staining under the taps and around the waste, across basins & shower trays, cast iron baths and acrylic baths.
We stand behind the work with a one-year guarantee.
- Location
- Weybourne (NR25)
- County
- Norfolk
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Weybourne
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Look out for these signs:
- Staining under the taps and around the waste
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- A period or roll-top bath worth keeping
Before you book anyone
- Whether the price is fixed and includes VAT
- How the colour is matched
- Whether there are any call-out or travel charges
- When it can be used again
Weybourne: your questions answered
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
What areas do you cover?
The entire UK, including all of Norfolk. Just include your postcode and we will confirm dates.
Can you change the colour of my bath?
Yes, most people go for white. Mention the colour you want when you send pictures.
How long does re-enamelling take?
Normally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
Getting a price
Most clients in Weybourne get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Also near Weybourne
Other services in Weybourne
Where we work around Weybourne
Weybourne is about 13 miles north-west of North Walsham, in Norfolk. Jobs in Weybourne are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Weybourne is one of 797 places in Norfolk we cover.
Every address in NR25 is within our area. Streets in the area include The Street, Station Road and Church Street, and we cover them all. If you are just outside Weybourne, we cover Kelling (1 mile west), High Kelling (2 miles south), Bodham (2 miles south-east), Salthouse (2 miles west) and Upper Sheringham (2 miles east). Larger places within reach include North Walsham (13 miles south-east), Sheringham (3 miles east), Cromer (7 miles east), Fakenham (14 miles south-west), Aylsham (11 miles south-east) and Holt (3 miles south-west).
What’s near Weybourne
Typical jobs here are in homes near Church of All Saints, Kelling CE Primary School and Sheringham High School. The closest station to Weybourne is Sheringham station, roughly 2.9 miles east. A little further out are Gresham Castle (4.6 miles south-east) and William Marriott Museum (2.2 miles south-west). Not far away are Kelling Heath and Beacon Hill.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Norfolk and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Weybourne. The price depends on:
- The size and number of damaged areas
- The material
- How hard the colour is to match
- Doing more than one item at once
We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
You can typically get a fixed quote without us visiting. To help us price it:
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- Same prices wherever you are
- One-year guarantee on every repair
Take a look at our prices page and bath cost comparison.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
