Lancashire · England
Bath Re-enamelling in Holmeswood
We travel to Holmeswood for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- Free fixed quotes from pictures
- Technicians who travel to you, UK-wide
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and guide to resurfacing and replacement costs.
Bath re-enamelling in Holmeswood, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Common call-outs are for stains that won’t shift and a peeling or bubbling previous coating, across basins & shower trays, acrylic baths and cast iron baths.
All our work is covered by a one-year guarantee, wherever you are in Lancashire.
- Location
- Holmeswood (L40)
- Area hub
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Questions from Holmeswood
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you cover Holmeswood?
Yes. We cover the entire UK and come to Holmeswood and the rest of Lancashire. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can you do the outside of a roll-top?
Yes. Inside and out.
Prices and what affects them
Resurfacing from £350. There is no area surcharge for Holmeswood. The price reflects:
- The type of damage
- Access to the area
- Any earlier repairs that need removing first
- Whether we combine several jobs
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Two or three clear pictures are normally enough. It helps if you send:
- Details of any past repairs
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Natural light rather than flash
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
About Holmeswood
Holmeswood is about 5 miles north of Ormskirk, in Lancashire. Our technicians come to homes and businesses in Holmeswood and the surrounding area, so nothing has to leave your home. We cover 482 places across Lancashire. Our nearest city page is Liverpool, about 16 miles away.
Our visits in L40 work the same way as everywhere else we cover. Local streets include Sandy Way, Sandy Lane and Holmeswood Road, all of which we cover. Other places close to Holmeswood include Mere Side (1 mile west), Tarlscough (1 mile south), Rufford (1 mile east), Sollom (2 miles north-east) and Holmes (2 miles north). Within a short drive, we also cover Preston (11 miles north-east), Chorley (9 miles east), Lytham St Anne's (10 miles north-west), Bamber Bridge (10 miles north-east), Leyland (7 miles north-east) and Fulwood (11 miles north-east).
Local landmarks in Holmeswood
Typical jobs here are in homes near Holmeswood Methodist School and the streets around them. The nearest railway station is Rufford station, about 1.8 miles east of the centre. Well-known places in the area include Greaves Hall (3.6 miles north-west). Not far away are Martin Mere and Mere Sands Wood.
For landlords and businesses
We work for landlords, letting agents and housing providers in Holmeswood as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a full day for most jobs. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Let the surface dry out before the visit
Get a quote
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
What else we do in Holmeswood
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
- Acrylic that moves when you stand in it
Send us photos and we’ll tell you honestly.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t leave bottles, razors or sponges standing on the surface
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
