Hampshire · England
Bath re-enamelling & resurfacing in Holt End, Hampshire
Full bath re-enamelling and resurfacing for homes and businesses in Holt End and across Hampshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- Worn patches where water runs and sits
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many areas need work
- Any earlier repairs that need removing first
- The type of damage
- How easy the damage is to reach
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
How we handle bath re-enamelling in Holt End
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s several chips and rust patches and a period or roll-top bath worth keeping, we can usually put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Holt End (GU34)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Holt End
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Holt End customers choose us
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- No need to remove anything
- Usually one visit, start to finish
Read our full price list or guide to resurfacing and replacement costs.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to most of the day, tidy-up included.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
FAQs for Holt End
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll let you know when it’s safe to use again.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
How long will the bath be out of use?
One day for most baths and can be used the day after. We give you timings with the quote.
Which areas do you work in?
All of Hampshire, and the rest of the UK. Travel is included in the price.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Holt End and nearby
Holt End is about 4 miles west of Alton, in Hampshire. Wherever you are in the GU34 postcode area, we carry out the work at your property. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 48 miles away.
Every address in GU34 is within our area. We also cover the places around Holt End: Bentworth (1 mile north-east), New Copse (1 mile south), Wivelrod (1 mile south-east), Thedden (1 mile east) and South Town (1 mile south). Larger places within reach include Basingstoke (8 miles north), Winchester (13 miles south-west), Fleet (13 miles north-east), Aldershot (15 miles north-east), Alton (4 miles east) and Petersfield (11 miles south-east).
Local landmarks in Holt End
Around Holt End, we work in homes near St. Mary's Church, The Star Inn and St Mary's Bentworth Church of England Primary School and the streets around them. The nearest railway station is Alton station, roughly 3.9 miles east of the centre. Further afield, we also cover the area around Alton Community Hospital (3 miles east) and Gliding Heritage Centre (2.9 miles north-east). The countryside around Holt End includes King's Hill.
Landlords, agents and businesses in Holt End
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
When to call us in Holt End
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Clients typically contact us about:
- A dull, rough surface that will not come clean
- Thin, worn enamel in places
- A coloured bath you want in white
- Several chips and rust patches
Before booking anyone
- How your room will be protected
- Whether the colour is mixed to match
- Whether the price covers travel
- What prep work is covered
Places near Holt End
Other services in Holt End
What we cannot put right
In fairness, there are a few things a repair won’t fix:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
