Hampshire · England
Bath re-enamelling & resurfacing in Bentworth, Hampshire
Bath re-enamelling for Bentworth, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
What we’re called out for in Bentworth
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Clients typically contact us about:
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Worn patches where water runs and sits
Before booking anyone
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
Bath re-enamelling in Bentworth, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re frequently asked to fix a roll-top that’s seen better days and a coloured bath you want in white, in cast iron baths, basins & shower trays and pressed steel baths.
You get a one-year guarantee, the same in Bentworth as everywhere else we work.
- Area
- Bentworth (GU34)
- County
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take most of the day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Open a window if you can
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Work for landlords and builders
For anyone letting property in or around Bentworth, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How to look after the repair
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs immediately
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repair or replace in Bentworth?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Bentworth customers choose us
- A fixed quote before you book
- Work done at your home or business
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or guide to resurfacing and replacement costs.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Bentworth and the surrounding area
Bentworth is about 3 miles west of Alton, in Hampshire. We visit customers in Bentworth, so you do not need to take anything anywhere. Bentworth is one of 683 towns and villages in Hampshire we cover. You can also see our page for London, about 47 miles away.
Every address in GU34 is within our area. Local streets include Village Street, Church Street and Drury Lane, all of which we cover. Other places close to Bentworth include Holt End (1 mile south-west), Thedden (1 mile south-east), Wivelrod (1 mile south-east), New Copse (1 mile south-west) and Beech (2 miles south-east). We also work in nearby towns such as Basingstoke (8 miles north), Winchester (13 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles north-east) and Alton (3 miles east).
What’s near Bentworth
Our clients here include homes close to St Mary's Bentworth Church of England Primary School, The Star Inn and St. Mary's Church, among other places. For rail, the closest station is Alton station, roughly 3.5 miles east of the centre. Further afield, we also cover the area around Barton Castle (3.2 miles south-west) and Gliding Heritage Centre (2.2 miles north-east). Green spaces nearby include King's Hill.
Prices and what affects them
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Access to the area
- The material
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
Two or three clear pictures are usually enough. Try to include:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
More services for Bentworth
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Materials we work on in Bentworth
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Questions from Bentworth
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your pictures and you will get one combined price.
Is repairing better than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
About our accreditations · Every repair comes with a one-year guarantee.
