Greater London · England

Bath re-enamelling & resurfacing in Hooley, Greater London

Bath re-enamelling across Hooley and nearby, usually in one visit.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Hooley

Bath re-enamelling in Hooley without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a peeling or bubbling previous coating and a bath in a colour that no longer suits, we can generally put it right.

Your repair is guaranteed for a year, as with every job we do.

Roll-top bath being refinished by a Surface Doctor technician
Where
Hooley (CR5, RH1)
Area hub
Greater London
Cover
One year on every repair
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

How we price bath re-enamelling

Resurfacing from £350. We price every job individually, from your photos. The main factors are:

  • The type of damage
  • Unusual colours or finishes
  • Any earlier repairs that need removing first
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • Natural light rather than flash
  • Your postcode, so we can check dates
  • One sharp close-up of the damage
  • Any details about the material

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.

How the visit works

We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to look after it.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Preparing for the visit

  • Let the surface dry out before the visit
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Get a quote

Send us a picture of the damage and one of the entire item, with your CR5 postcode, and we’ll reply with a fixed price.

Get a free quote

Related advice

Why repair rather than replace?

A refit takes several trades and several days. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • Straight answers about what a repair can do
  • A fixed quote before booking
  • No extra charge for your area
  • One-year guarantee on every repair

Read our full price list or bath cost comparison.

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up
  • Steel that has corroded right through

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops

Hooley questions

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you repair several things at once?

Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.

Do you cover Hooley?

We do. We send a technician to Hooley for every job, with no extra charge for travel.

Is it safe with children and pets around?

Just keep them out of the work area. We will tell you when the room can be used again.

Can you do the outside of a roll-top?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that is in the quote.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Different materials, different repairs

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

How to look after the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Dry the bath after use to stop limescale
  • Don’t leave bottles, razors or sponges standing on the surface
  • Leave the bath for the full curing time before using it
  • Keep suction mats out of the bath

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Our work in Hooley

Hooley is about 2 miles south-west of Coulsdon, in Greater London. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Hooley is one of 764 towns and villages in Greater London where we work. We work right across the region, from Hooley to London (15 miles away).

Every address in CR5 and RH1 is covered. Whether you live on Church Lane Avenue, Church Lane Drive and Brighton Road or a nearby road, we can come to you. We also cover the places around Hooley: Netherne on-the-Hill (1 mile east), Merstham (2 miles south), Mugswell (2 miles south-west), Gatton (2 miles south) and South Merstham (2 miles south). We also work in nearby towns such as London (15 miles north), City of Westminster (15 miles north), Kensington (15 miles north), Brompton (14 miles north), Stockwell (12 miles north) and Orpington (13 miles north-east).

Near you in Hooley

In Hooley, that means homes near Coulsdon Sixth Form College, Church of St Margaret and Shabden Park. The closest station to Hooley is Chipstead station, about 1.4 miles north-west of the centre. Further afield, we also cover the area around East Surrey Museum (3.4 miles east) and St Lawrence's Hospital (2.5 miles east). The countryside around Hooley includes Colley Hill and South London Downs National Nature Reserve.

Map of Hooley © OpenStreetMap contributors

Landlords, agents and businesses in Hooley

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.