Greater London · England
Bath re-enamelling & resurfacing in Netherne on-the-Hill, Greater London
Fixed-price bath re-enamelling in Netherne on-the-Hill and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling in Netherne on-the-Hill without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with a roll-top that’s seen better days and a coloured bath you want in white, we can generally put it right, on Victorian roll-tops, basins & shower trays and pressed steel baths alike.
You get a one-year guarantee, the same in Netherne on-the-Hill as everywhere else we work.
- Location
- Netherne on-the-Hill (CR5)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Have a window or extractor fan available
- Let us know which floor the room is on
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Advice
Signs you need bath re-enamelling in Netherne on-the-Hill
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Get in touch if you’ve noticed:
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Wear marks under the taps
- A dull, rough surface that will not come clean
Questions to ask before booking
- How the room is protected while they work
- Who will actually do the work
- Whether the price covers travel
- Is the price fixed, and does it include VAT?
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs straight away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace in Netherne on-the-Hill?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Netherne on-the-Hill clients choose us
- We’ll tell you if it’s not worth repairing
- Work done at your home or business
- Dust sheets down, tidy finish
- One-year guarantee on every repair
Take a look at our prices page and bath cost comparison.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
More services for Netherne on-the-Hill
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- The material
- Where the damage is and how we get to it
- How many areas need work
- Whether we combine several jobs
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- Any earlier repairs or coatings
- Where you are, by postcode
- A clear, close picture of the problem area
- Something in shot to show the size
Upload a picture of the damage and a wider shot of the whole item, with your CR5 postcode, and we will come back with a fixed quote.
When we would advise against a repair
It helps to know what we cannot do:
- A bath that is rusted through
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Netherne on-the-Hill questions
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you redo someone else’s repair?
Generally, yes. The old repair comes out first.
What happens once I’ve sent pictures?
You’ll get a fixed quote back. There’s no obligation to book.
Are there extra charges for Netherne on-the-Hill?
No. Our quotes include travel, with the same prices everywhere we work.
How much does bath re-enamelling cost in Netherne on-the-Hill?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Do you cover the entire of Greater London?
We cover the whole UK, including Netherne on-the-Hill and the rest of Greater London. Send your postcode with your pictures and we will offer you dates.
Netherne on-the-Hill and the surrounding area
Netherne on-the-Hill is about 2 miles south of Coulsdon, in Greater London. Whether you’re in the middle of Netherne on-the-Hill or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Netherne on-the-Hill is one of 764 places in Greater London we cover. Our nearest city page is London, about 14 miles away.
Every address in CR5 is within our area. Jobs here include addresses on The Village Square, Rookery Mead and Netherne Lane and the roads around them. Neighbouring places we cover include Hooley (1 mile west), Merstham (2 miles south), Chaldon (2 miles south-east), South Merstham (2 miles south) and Gatton (2 miles south-west). Larger places within reach include London (14 miles north), City of Westminster (15 miles north), Kensington (15 miles north), Brompton (14 miles north), Stockwell (12 miles north) and Orpington (12 miles north-east).
Near you in Netherne on-the-Hill
Locally, our jobs take us to homes close to Coulsdon Sixth Form College, Church of St Margaret and Shabden Park. For rail, the closest station is Coulsdon South station, roughly 1.6 miles north of the centre. Other landmarks nearby include The Belfry (3.8 miles south) and East Surrey Museum (2.9 miles east). The countryside around Netherne on-the-Hill includes South London Downs National Nature Reserve and Colley Hill.
About our accreditations · Every repair comes with a one-year guarantee.
