Cumbria · England
Bath Re-enamelling in How
Full bath re-enamelling and resurfacing at your home in How, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- A roll-top that is seen better days
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
About our bath re-enamelling in How
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. We work on acrylic baths, basins & shower trays and pressed steel baths, and common reasons people contact us are chips and rust in more than one place and staining under the taps and around the waste.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- How (CA8)
- County
- Cumbria
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in How
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near How
What else we do in How
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What we do, step by step
We work cleanly and quietly. We protect the area first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Get a quote
For a price in How, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Colour-matched on site
- Fixed prices from your photos
- Everything repaired in place
- Normally one visit, start to finish
Take a look at our full price list and resurfacing vs replacement cost guide.
About How
How is about 7 miles east of Carlisle, in Cumbria. Wherever you are in the CA8 postcode area, we carry out the work at your property. We work in all 438 towns and villages across Cumbria. Our jobs stretch from How to Newcastle upon Tyne (45 miles away).
Here we cover the CA8 postcode area. Streets in the area include How Street and How Lane. Neighbouring places we cover include Hayton (1 mile north-west), Fenton (1 mile south), Heads Nook (2 miles south-west), Castle Carrock (2 miles south-east) and Talkin (2 miles east). Within a short drive, we also cover Carlisle (7 miles west), Currock (7 miles west), Raffles (8 miles west), Botcherby (7 miles west), Morton (8 miles west) and Belle Vue (9 miles west).
Landmarks near How
Locally, our jobs take us to homes close to Church of St Mary Magdalen, Graham Arms (West Of Gelt Bridge) and Hayton CofE Primary School, among other places. The closest station to How is Brampton (Cumbria) station, about 2.7 miles north-east of the centre. Other landmarks nearby include Brampton War Memorial Hospital (2.6 miles north-east) and Hayton Castle Hill (0.8 miles north-west). For a walk, there’s Talkin Tarn.
What we’re called out for in How
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The things clients normally mention when they call are:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What your quote should include
- How long the guarantee is and what it covers
- Who turns up on the day
- How long it needs to cure
- How the room is protected while they work
Common questions in How
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
How long does re-enamelling take?
One day for most baths, ready the next day. We give you timings with the quote.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Do you work in How?
Yes. We cover the entire UK and come to How and the rest of Cumbria. Send us pictures for a fixed quote, or call 0345 017 0787.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
About our accreditations · Every repair comes with a one-year guarantee.
