Wirral · England
Bath Re-enamelling in Hoylake
Bath re-enamelling across Hoylake and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
How we handle bath re-enamelling in Hoylake
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our technicians work on Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people get in touch are a period or roll-top bath worth keeping and an outdated colour you’d like to change.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Hoylake (CH47)
- Area hub
- Wirral
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Have chips seen to early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Also near Hoylake
Also in Hoylake
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Access to the area
- How many items we do on one visit
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- The material, if you know it
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Do you need bath re-enamelling in Hoylake?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a photo:
- Staining under the taps and around the waste
- A roll-top that is seen better days
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
What to look for in a quote
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- Whether a trained technician does the job
- How the colour is matched
Common questions in Hoylake
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It usually takes most of the day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Make sure the room can be ventilated
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Hoylake, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Our prices are the same across the UK, so there is no premium for Hoylake. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- A fixed quote before booking
- One price list for the whole UK
- Nothing taken out or refitted
- Honest advice, even when it means no job
Read our pricing or resurfacing vs replacement cost guide.
About Hoylake
Hoylake is about 1 mile north of West Kirby, in Wirral. Wherever you are in the CH47 postcode area, we carry out the work at your property. Our repair technicians cover 44 places in Wirral. You can also see our page for Liverpool, about 10 miles away.
Jobs in CH47 are booked in the same way as anywhere else. That includes homes on Market Street, Station Road and Evans Road and the roads around them. Being close to the A540 and A553, Hoylake is easy for our repair technicians to reach. If you’re just outside Hoylake, we cover West Kirby (1 mile south), Newton (2 miles south-east), Larton (2 miles south-east), Frankby (2 miles south-east) and Saughall Massie (2 miles east). We also work in nearby towns such as Birkenhead (5 miles east), Wallasey (6 miles east), Bebington (8 miles south-east), Heswall (5 miles south-east), Moreton (3 miles east) and Bromborough (9 miles south-east).
Landmarks near Hoylake
We visit homes around Meols Park, Hoylake Presbyterian Church and Hoylake Holy Trinity C of E Primary school. You’ll also find Hoylake Lights pub (within half a mile south-east), Kingsmead School (0.5 miles north-east) and West Kirby Grammar School (1.1 miles south). Hoylake has its own railway station: Hoylake station. Other landmarks nearby include Hoylake Lifeboat Museum (less than half a mile north-west) and Arrowe Park Hospital (3.8 miles south-east). Open spaces near Hoylake include West Kirby Marine Lake and Bidston Hill.
About our accreditations · Every repair comes with a one-year guarantee.
