Lincolnshire · England
Bath Re-enamelling for Hubbert's Bridge homes
Bath re-enamelling for Hubbert's Bridge, without a refit. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- How easy the damage is to reach
- The material
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Two or three clear pictures are usually enough. Try to include:
- What it’s made of, if you know
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Bath re-enamelling in Hubbert's Bridge without replacing anything
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you are dealing with chips and rust in more than one place and a roll-top that’s seen better days, we can typically put it right, on Victorian roll-tops, pressed steel baths and basins & shower trays alike.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Hubbert's Bridge (PE20)
- Region
- Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Hubbert's Bridge
Other services in Hubbert's Bridge
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
When to call us in Hubbert's Bridge
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
It’s worth getting a quote if you see:
- Thin, worn enamel in places
- A coloured bath you want in white
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Before booking anyone
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How the colour is matched
- How to care for the finish
Our work in Hubbert's Bridge
Hubbert's Bridge is about 4 miles west of Boston, in Lincolnshire. Customers in Hubbert's Bridge get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Hubbert's Bridge is one of 732 towns and villages in Lincolnshire we cover.
Jobs in PE20 are booked in the same way as anywhere else. We also travel to Kirton Holme (1 mile south-west), Brothertoft (1 mile north), Baythorpe (2 miles south-west), Claydike Bank (2 miles north-west) and Swineshead (3 miles south-west). Within a short drive, we also cover Boston (4 miles east), Spalding (13 miles south), Sleaford (13 miles west), Holbeach (13 miles south-east), Woodhall Spa (13 miles north) and Pinchbeck (11 miles south).
Local landmarks in Hubbert's Bridge
Our clients here include homes close to Christ Church and the streets around them. Hubbert's Bridge has its own railway station: Hubberts Bridge station. Other landmarks nearby include Pilgrim Hospital (4.5 miles east) and Frampton Castle (4.5 miles south-east).
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Steel that has corroded right through
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
Send us pictures and we will tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
How it works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It normally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Getting a price
Most customers in Hubbert's Bridge get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Leave the bath for the full curing time before using it
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Hubbert's Bridge questions
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Hubbert's Bridge.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I need to be at home?
Someone needs to let us in and show us the job. You do not need to watch us work.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
About our accreditations · Every repair comes with a one-year guarantee.
