Argyll and Bute · Scotland
Bath Re-enamelling for Hunters Quay homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Hunters Quay. Send photos for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Chips and rust in more than one place
What happens on the day
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes the best part of a day, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Open a window if you can
How to get a price
If you are in Hunters Quay and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
Bath re-enamelling in Hunters Quay, done in place
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, Victorian roll-tops and acrylic baths, and the jobs we see most are thin, worn enamel in places and a roll-top that’s seen better days.
Big or small, you get the same one-year guarantee.
- Location
- Hunters Quay (PA23)
- Area hub
- Argyll and Bute
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also in Hunters Quay
What we can’t put right
We’ll always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Hunters Quay
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Repair or replace in Hunters Quay?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Our prices are the same across the UK, with no extra for Hunters Quay. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Nothing taken out or refitted
- One-year guarantee on every repair
- Same prices wherever you are
- A fixed quote before you book
See our prices page or resurfacing vs replacement cost guide.
What affects the price in Hunters Quay
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- What kind of damage it is
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Before you send pictures, these tips help us give you a firm price:
- A close-up of the damage, in focus
- One picture of the entire bath
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
FAQs for Hunters Quay
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What happens once I’ve sent pictures?
You will get a fixed quote back. You’re under no obligation.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Our work in Hunters Quay
Hunters Quay is about 3 miles west of Gourock, in Argyll and Bute. Clients in Hunters Quay get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We cover all 118 towns and villages in Argyll and Bute. Our nearest city page is Glasgow, about 25 miles away.
Postcode districts we cover here: PA23. If you’re just outside Hunters Quay, we cover Kirn (1 mile south-west), Dunoon (1 mile south-west), Strone (1 mile north), Sandbank (2 miles north-west) and Kilmun (3 miles north-west). Further out, we also cover Helensburgh (7 miles east), Rothesay (11 miles south-west), Rhu (6 miles north-east), Garelochhead (9 miles north), Port Bannatyne (10 miles south-west) and Innellan (6 miles south-west). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Hunters Quay
Typical jobs here are in homes near Kirn Primary School, Dunoon Grammar School and Kirn Church. Hunters Quay’s nearest station is Gourock station, about 3.3 miles east. A little further out are Dunoon Castle (1.7 miles south-west) and Cowal Community Hospital (1.2 miles south-west). Open spaces near Hunters Quay include Loch Loskin and Lyle Hill.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Argyll and Bute and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Signs you need bath re-enamelling in Hunters Quay
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
- A dull, rough surface that won’t come clean
Before you book anyone
- How the room is protected while they work
- Who turns up on the day
- How to look after the finish
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
