Lancashire · England
Bath Re-enamelling for Hurlston homes
Fixed-price bath re-enamelling in Hurlston and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. What matters most is:
- How much damage there is
- The material and finish
- Access to the area
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Phone photos are fine. Just make sure we can see:
- A clear, close picture of the problem area
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
About our bath re-enamelling in Hurlston
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Nothing is disconnected or removed. We’re often asked to fix chips and rust in more than one place and a bath in a colour that no longer suits, in cast iron baths, Victorian roll-tops and acrylic baths.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Hurlston (L40)
- Area hub
- Lancashire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Hurlston
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you cover Hurlston?
Yes, we do. Repair technicians travel to Hurlston from across the region, and the price is the same as everywhere else.
How do I get a price for bath re-enamelling in Hurlston?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Point us to the nearest place to park
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Related advice
When we would advise against a repair
It helps to know what we can’t do:
- A metal bath with a through crack
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Signs you need bath re-enamelling in Hurlston
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for these signs:
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
Before booking anyone
- How your room will be protected
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
- If travel is included in the price
Also near Hurlston
More services for Hurlston
About Hurlston
Hurlston is about 2 miles north of Ormskirk, in Lancashire. From the centre of Hurlston to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 482 towns and villages in Lancashire, from the larger towns to small villages. Our nearest city page is Liverpool, about 13 miles away.
We cover every part of the L40 postcode area. Close by, we cover Hurlston Green (1 mile north-west), Pinfold (1 mile west), Bangor's Green (2 miles south-west), Halsall (2 miles west) and Barton (3 miles west). We also work in nearby towns such as Preston (15 miles north-east), Chorley (12 miles east), Lytham St Anne's (12 miles north), Bamber Bridge (13 miles north-east), Leyland (11 miles north-east) and Fulwood (15 miles north-east).
Local landmarks in Hurlston
Locally, our jobs take us to homes close to St. Bede's Catholic High School, Pinfold Primary School and Good Shepherd Mission Church. For rail, the closest station is New Lane station, roughly 1.8 miles north-east. Other landmarks nearby include Ormskirk and District General Hospital (2.3 miles south-east). The countryside around Hurlston includes WWT Martin Mere and Martin Mere.
About our accreditations · Every repair comes with a one-year guarantee.
