Lancashire · England
Bath Re-enamelling for Pinfold homes
Bath re-enamelling for Pinfold, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
For anyone letting property in or around Pinfold, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.
About our bath re-enamelling in Pinfold
The bath stays where it is, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. Typical jobs include a bath in a colour that no longer suits and thin, worn enamel in places, across pressed steel baths, acrylic baths and basins & shower trays.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pinfold (L40)
- Region
- Lancashire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Respect the curing time we give you
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Rinse off hair dye, oils and bath bombs straight away
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What affects the price in Pinfold
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- The colour and finish to match
- The size and number of damaged areas
- Where the damage is and how we get to it
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- The material, if you know it
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Common problems we fix in Pinfold
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
Look out for any of the following:
- Several chips and rust patches
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- If travel is included in the price
- How changes to the job are handled
- How long it needs to cure
- A fixed quote, and whether VAT is included
About Pinfold
Pinfold is about 3 miles north-west of Ormskirk, in Lancashire. Clients in Pinfold get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 482 towns and villages across Lancashire, from the larger towns to small villages. Our jobs stretch from Pinfold to Liverpool (13 miles away).
Here we cover the L40 postcode area. We regularly work on streets such as Southport Road, Wheelwrights Wharf and Pinfold Lane. Neighbouring places we cover include Hurlston Green (1 mile east), Hurlston (1 mile east), Halsall (2 miles south-west), Bangor's Green (2 miles south) and Barton (3 miles south-west). Further out, we also cover Preston (15 miles north-east), Chorley (13 miles east), Lytham St Anne's (11 miles north), Bamber Bridge (14 miles north-east), Leyland (11 miles north-east) and Fulwood (15 miles north-east).
Around Pinfold
Our customers here include homes close to Pinfold Primary School, Good Shepherd Mission Church and Morris Dancers pub, among other places. The nearest railway station is Bescar Lane station, about 1.8 miles north of the centre. Nearby you will also find Ormskirk and District General Hospital (3.2 miles south-east). Green spaces nearby include Martin Mere and WWT Martin Mere.
Nearby places to Pinfold
Other services in Pinfold
Pinfold: your questions answered
Can you price it without visiting?
In nearly every case. If pictures do not show enough, we will ask for another angle.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Are there extra charges for Pinfold?
No. Our quotes include travel, with the same prices everywhere we work.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
Read more
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Problems we cannot see until an old finish comes off
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Pinfold
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- One price list for the whole UK
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
