Shetland Islands · Scotland
Bath Re-enamelling in Huxter
Damaged bath in Huxter? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
Huxter and nearby
Huxter is in the Shetland Islands. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 63 places across the Shetland Islands, from the larger towns to small villages.
Our technicians cover all of the ZE2 postcode area. If you are just outside Huxter, we cover Symbister (1 mile west), Hamister (1 mile north-west), Sandwick (1 mile west), Clate (1 mile west) and Tripwell (1 mile north). Within a short drive, we also cover Lerwick (14 miles south-west), Sound (15 miles south-west) and Brae (13 miles west). Some remote addresses need extra planning, so call us to arrange it.
Around Huxter
Not far away are Loch of Huxter and Ward of Clett.
Bath re-enamelling in Huxter, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include a period or roll-top bath worth keeping and several chips and rust patches, on Victorian roll-tops, acrylic baths and pressed steel baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Huxter (ZE2)
- Region
- Shetland Islands
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Huxter
What we’re called out for in Huxter
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Most people contact us after spotting one of these:
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- Staining under the taps and around the waste
Questions to ask before you book
- What prep work is covered
- Who will actually do the work
- What aftercare is recommended
- How your room will be protected
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Have a window or extractor fan available
- Ensure the area is dry
- Keep children and pets away from the room on the day
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What we can’t put right
It helps to know what we can’t do:
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Huxter
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Common questions in Huxter
Do you come to Huxter?
We do. We send a technician to Huxter for every job, and the price is the same as everywhere else.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Which areas do you work in?
We cover the whole UK, including Huxter and the rest of the Shetland Islands. Just include your postcode and we will confirm dates.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How quickly can you book me in?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
How do I get a price for bath re-enamelling in Huxter?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before booking.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Should you replace it?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Why book with us
- One price list for the entire UK
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
Read our prices page and guide to resurfacing and replacement costs.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The colour and finish to match
- How many items we do on one visit
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Phone photos are fine. Just ensure we can see:
- Any earlier repairs or coatings
- Natural light rather than flash
- The material, if you know it
- A coin or ruler next to the damage for scale
If you are in Huxter and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
