Perth and Kinross · Scotland
Bath Re-enamelling for Inchture homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Inchture. Send photos for a free, fixed quote.
- Resurfacing from £350
- Stains that won’t shift
- Lots of chips and rust spots
Bath re-enamelling at your home in Inchture
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are a peeling or bubbling previous coating and chips and rust in more than one place.
Every job is backed for twelve months in Inchture and everywhere else. We return to put right any problem with the work.
- Area
- Inchture (PH14)
- Area hub
- Perth and Kinross
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- We leave the room as we found it
- Work done at your home or business
- Most jobs done in one visit
- A fixed quote before you book
See our prices page and bath cost comparison.
Towns and villages near Inchture
What else we do in Inchture
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Repair dripping taps early
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What a repair cannot fix
To be straight with you, there are a few things a repair will not fix:
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Inchture
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
What bath re-enamelling costs
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Access to the area
- How many areas need work
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- Details of any past repairs
- What it’s made of, if you know
- A photo taken from further back
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Inchture questions
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
How do I get a price for bath re-enamelling in Inchture?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
How long is the bath unusable?
Generally one day, with the bath ready the following day. Deeply pitted baths may need a second day.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take the best part of a day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
How to get a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Landlords, agents and businesses in Inchture
Landlords, letting agents and housing providers in Inchture use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Housing associations and facilities teams use us for planned and reactive repairs in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Where we work around Inchture
Inchture is about 7 miles west of Dundee, in Perth and Kinross. Customers in Inchture get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Inchture is one of 107 places in Perth and Kinross where we work. Our jobs stretch from Inchture to Edinburgh (35 miles away).
We cover every part of PH14 and the streets around it. From Flower of Monorgan Close, Seggieden Close and Orchard Way or a nearby road, a technician can come to you. Neighbouring places we cover include Longforgan (2 miles north-east), Grange (2 miles south), Kingoodie (4 miles east), Fowlis (4 miles north-east) and Errol (4 miles south-west). We also work in nearby towns such as Perth (11 miles west), Blairgowrie and Rattray (12 miles north-west), Letham (12 miles west), Scone (9 miles west), Tulloch (12 miles west) and Alyth (13 miles north).
Around Inchture
Around Inchture, we work in homes near Inchture Church, among other places. Inchture’s nearest station is Invergowrie station, roughly 4.2 miles east of the centre. Nearby you will also find Moncur Castle (0.6 miles north) and Royal Dundee Liff Hospital (4.5 miles north-east). For a walk, there is Rossie Lake and Gask Hill.
About our accreditations · Every repair comes with a one-year guarantee.
