Cumbria · England

Bath Re-enamelling in Ivegill

Bath re-enamelling for Ivegill, without a refit. Get a fixed quote from your pictures, then we come to you.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • An old resurfacing that’s failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Ivegill homes

Ivegill questions

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside if you’d like.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Ivegill.

Will the new finish last?

Care for it and it lasts. Gentle cleaning, no suction mats.

Will the bath be moved?

No. We resurface it in place, so nothing else is disturbed.

How we handle bath re-enamelling in Ivegill

Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We regularly repair pressed steel baths, acrylic baths and Victorian roll-tops, and the jobs we see most are thin, worn enamel in places and brown or grey marks that don’t clean off.

Every job is backed for twelve months. We return to put right any problem with the work.

Roll-top bath being refinished by a Surface Doctor technician
Where
Ivegill (CA4)
Region
Cumbria
Warranty
A year, on every repair
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Avoid suction-cup mats
  • Fix dripping taps quickly
  • Don’t use the bath until it has fully cured
  • Rinse off hair dye, oils and bath bombs straight away

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

Landlord and trade work in Ivegill

We’re used to working with agents and managing companies. Just send photos, the address and how to get access.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Should I try a DIY kit first?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

What bath re-enamelling costs

Prices start from £350. There are no hourly rates or hidden extras. The price is based on:

  • Access to the area
  • What kind of damage it is
  • How many areas need work
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

We price nearly every job from pictures. This is what we need:

  • Your postcode, so we can check dates
  • Natural light rather than flash
  • Something in shot to show the size
  • Details of any past repairs

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.

Repairing versus replacing in Ivegill

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • We come to you, anywhere in the UK
  • Free fixed quotes from pictures

Take a look at our prices page or bath cost comparison.

About Ivegill

Ivegill is about 8 miles south of Carlisle, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 438 towns and villages in Cumbria. We work right across the region, from Ivegill to Newcastle upon Tyne (about 52 miles away).

Our visits in CA4 work the same way as everywhere else we cover. We also travel to Southwaite (2 miles north-east), Raughton Head (3 miles north-west), Calthwaite (3 miles south-east), Low Hesket (3 miles north-east) and High Hesket (4 miles east). Further out, we also cover Carlisle (8 miles north), Penrith (10 miles south-east), Currock (7 miles north), Raffles (8 miles north), Keswick (15 miles south-west) and Botcherby (7 miles north).

What’s near Ivegill

Typical jobs here are in homes near Christ Church and Ivegill CofE School and the streets around them. Further afield, we also cover the area around High Head Castle (1 mile west).

Map of Ivegill © OpenStreetMap contributors

What we are called out for in Ivegill

Older baths frequently have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Get in touch if you’ve noticed any of these:

  • Wear marks under the taps
  • An original cast iron bath that needs restoring
  • Stains that will not shift
  • A bath in a colour that no longer suits

What your quote should include

  • When it can be used again
  • Whether the price is fixed and includes VAT
  • Whether cleaning and preparation are in the price
  • How to care for the finish

10 questions to ask before booking

How it works

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Let us know about parking or access

How to get a price

If you’re in Ivegill and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.