Glasgow · Scotland
Bath Re-enamelling in Kennishead
Our repair technicians come to Kennishead for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
About our bath re-enamelling in Kennishead
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on acrylic baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and an original cast iron bath that needs restoring.
You are covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Kennishead (G46, G43, G53)
- Region
- Glasgow
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Kennishead. The price depends on:
- The size and number of damaged areas
- The colour and finish to match
- Doing more than one item at once
- The type of damage
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
How to get a fixed price
Good pictures mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- A picture taken from further back
- What it’s made of, if you know
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface without moving it. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Why Kennishead customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Technicians who travel to you, UK-wide
- We leave the room as we found it
Read our pricing and bath cost comparison.
Honest limits
Before you book, it’s worth knowing the limits too:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Covering Kennishead
Kennishead is about 2 miles north-west of Giffnock, in Glasgow. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 183 towns and villages across Glasgow, from the larger towns to small villages.
All of G46, G43 and G53 is covered. You will find streets such as Brent Road, Main Street and Kilmuir Road, and we cover them all. We also travel to Carnwadric (1 mile south), Arden (1 mile south-west), Eastwood (1 mile east), Cowglen (1 mile north-west) and Mansewood (1 mile east). Within a short drive, we also cover Glasgow (3 miles north-east), Hillhead (4 miles north), Dowanhill (5 miles north), Woodlands (4 miles north-east), Woodside (5 miles north-east) and North Kelvinside (5 miles north).
Around Kennishead
Locally, our jobs take us to homes close to Hillpark Secondary School, Glasgow and Rouken Glen. Kennishead has its own railway station: Kennishead station. Further afield, we also cover the area around Silverburn Shopping Centre (0.9 miles north-west) and The Open Museum (1.6 miles west). Green spaces nearby include Cathkin Braes.
Also near Kennishead
More services for Kennishead
When to call us in Kennishead
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Get in touch if you’ve noticed any of these:
- A bath in a colour that no longer suits
- An old resurfacing that is failing
- Chips and rust in more than one place
- Worn patches where water runs and sits
What to look for in a quote
- How your room will be protected
- What the guarantee covers, and for how long
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a full day from start to finish. Before we go, we’ll explain how long to leave it and how to care for it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Make sure the area is dry
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Kennishead as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Questions from Kennishead
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
About our accreditations · Every repair comes with a one-year guarantee.
