Greater London · England
Bath re-enamelling & resurfacing in Kilburn, Greater London
Bath re-enamelling in Kilburn without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- A coloured bath you want in white
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Kilburn. The price comes down to:
- How easy the damage is to reach
- The colour and finish to match
- How many areas need work
- Whether we combine several jobs
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- One sharp close-up of the damage
Upload photos of the damage and one of the entire item, with your NW6 postcode, and we’ll reply with a fixed price.
About our bath re-enamelling in Kilburn
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you are dealing with an old resurfacing that’s failing and stains that won’t shift, we can help, on cast iron baths, pressed steel baths and Victorian roll-tops alike.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Kilburn (NW6, W9, W10)
- County
- Greater London
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Kilburn questions
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Do you work in Kilburn?
We do. Technicians travel to Kilburn from across the region, with no extra charge for travel.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How to look after the repair
It’s all simple stuff:
- Rinse off hair dye, oils and bath bombs immediately
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Store bottles off the bath
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Also near Kilburn
Also in Kilburn
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Prices start from £350. We charge the same wherever you are, with no extra for Kilburn. The job itself decides the price: the material, the amount of damage and how many items.
Why Kilburn clients choose us
- Same prices wherever you are
- Everything repaired in place
- Fixed prices from your pictures
- We’ll tell you if it’s not worth repairing
Take a look at our prices page or bath cost comparison.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Related advice
What we are called out for in Kilburn
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- A dull, rough surface that won’t come clean
- A coloured bath you want in white
- Several chips and rust patches
- A period or roll-top bath worth keeping
What to look for in a quote
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
- Who turns up on the day
- How your room will be protected
Kilburn and nearby
Kilburn is about 3 miles north-west of City of Westminster, in Greater London. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Kilburn is one of 764 towns and villages in Greater London we cover.
We cover every part of NW6, W9 and W10 and the streets around it. Local streets include The Lane, Dyne Road and Quex Road, and we cover them all. Kilburn is on the A4003, so it’s easy for us to reach. If you are just outside Kilburn, we cover Queen's Park (1 mile south), Kensal Rise (1 mile south-west), Brondesbury (1 mile north), Kensal Town (1 mile south) and Kensal Green (1 mile south-west). Within a short drive, we also cover London (5 miles south-east), City of Westminster (3 miles south-east), Marylebone (3 miles south-east), Kensington (3 miles south), St Pancras (4 miles east) and Shoreditch (5 miles east).
Near you in Kilburn
Typical jobs here are in homes near Queen’s Park, The Brondesbury Arms and Maida Vale School. Other local landmarks include Salusbury Primary School (under half a mile west), St Anne's and St Andrew's (less than half a mile north-west) and Marylebone Boys' School (within half a mile north-east). Kilburn has its own railway station: Queens Park (London) station. Nearby you will also find O2 Centre (1.2 miles north-east) and Montfichet's Tower (4.7 miles east). Not far away are Greville Place nature reserve and Primrose Hill.
- Parks and local facilities nearby include Frognal and Fitzjohns (1.5 miles north-east)
What we can’t put right
A repair is not right for every job, for example:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
