Cornwall · England
Bath re-enamelling & resurfacing in Kilhallon, Cornwall
Full bath re-enamelling and resurfacing for homes and businesses in Kilhallon and across Cornwall. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Wear marks under the taps
- An original cast iron bath that needs restoring
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
- Keep suction mats out of the bath
- Get any chip repaired quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
How we handle bath re-enamelling in Kilhallon
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on Victorian roll-tops, acrylic baths and cast iron baths, and common reasons people get in touch are stains that won’t shift and enamel that’s lost its shine and feels rough.
All of our repairs are guaranteed for twelve months in Kilhallon and everywhere else. We return to put right any problem with the work.
- Where
- Kilhallon (PL24)
- Region
- Cornwall
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Kilhallon
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
It’s worth getting a quote if you see:
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- Lots of chips and rust spots
Before booking anyone
- Whether they match the colour on site
- How your room will be protected
- How to care for the finish
- How soon you can use it again
Also near Kilhallon
Other services in Kilhallon
Your questions about bath re-enamelling in Kilhallon
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What happens after I send photos?
We review the pictures and send a fixed quote.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Why choose Surface Doctor in Kilhallon
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
Take a look at our full price list or bath cost comparison.
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we look at:
- What the surface is made of
- How hard the colour is to match
- How much damage there is
- Any earlier repairs that need removing first
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- What it’s made of, if you know
- Natural light rather than flash
- Something in shot to show the size
- Where you are, by postcode
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Kilhallon and the surrounding area
Kilhallon is about 3 miles north-east of St Austell, in Cornwall. Customers in Kilhallon get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Kilhallon is one of 644 places in Cornwall we cover.
Every address in PL24 is covered, from the main roads to the quietest streets. Whether you live on Driving Lane, Kilhallon Woodlands and St Andrew's Road or anywhere nearby, we can come to you. Nearby, we also work in Lanescot (1 mile north-east), Par (1 mile south-east), Porcupine (1 mile north), St Blazey (1 mile south-west) and St Blazey Gate (1 mile south-west). Larger places within reach include St Austell (3 miles south-west), Bodmin (8 miles north), Liskeard (13 miles north-east), Sandy Bottom (3 miles south-west), Addington (13 miles north-east) and Bethel (3 miles south-west).
Local landmarks in Kilhallon
Typical jobs here are in homes near Tywardreath School, The Royal Inn and Church of St Blaize and the streets around them. There is a railway station in Kilhallon itself: Par station. Nearby you’ll also find Luxulyan Museum And Heritage Centre (2.7 miles north-west) and St Catherine's Castle (3.5 miles south-east). The countryside around Kilhallon includes Helman Tor and Red Moor nature reserve.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
How the visit works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
