Cornwall · England
Bath Re-enamelling for Lanescot homes
Damaged bath in Lanescot? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Brown or grey marks that do not clean off
About our bath re-enamelling in Lanescot
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. If you’re dealing with thin, worn enamel in places and several chips and rust patches, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Lanescot (PL24)
- Area hub
- Cornwall
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Our work in Lanescot
Lanescot is about 3 miles north-east of Sandy Bottom, in Cornwall. We visit clients in Lanescot and the surrounding area, so there is no workshop to go to. We work in 644 places across Cornwall.
Postcode districts we cover here: PL24. Streets in the area include Driving Lane, Porcupine Lane and Blackberry Way. Neighbouring places we cover include Porcupine (1 mile north-west), Kilhallon (1 mile south-west), Par (1 mile south), St Blazey (1 mile south-west) and St Blazey Gate (2 miles south-west). We also work in nearby towns such as St Austell (4 miles south-west), Bodmin (7 miles north), Liskeard (12 miles north-east), Sandy Bottom (3 miles south-west), Addington (13 miles north-east) and Bethel (3 miles south-west).
What’s near Lanescot
In Lanescot, that means homes near The Royal Inn, Church of St Andrew and Tywardreath School. For rail, the closest station is Par station, roughly 0.8 miles south. Nearby you’ll also find St Catherine's Castle (3.6 miles south-east) and Fowey Community Hospital (3.4 miles south-east). The countryside around Lanescot includes Red Moor nature reserve and Helman Tor.
What we are called out for in Lanescot
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is typically perfectly sound.
Typical reasons for a call-out include:
- An old resurfacing that is failing
- Stains that won’t shift
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Before you book anyone
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- How the room is protected while they work
- What the guarantee covers, and for how long
Lanescot: your questions answered
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How much does bath re-enamelling cost in Lanescot?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your PL24 postcode.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Why repair rather than replace?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Lanescot customers choose us
- Nothing taken out or refitted
- Work done at your home or business
- A year’s guarantee on all work
- Usually one visit, start to finish
Read our pricing and bath cost comparison.
Places near Lanescot
Also in Lanescot
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. Allow most of the day, and we’ll tell you if anything changes.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- The material
- Whether we combine several jobs
- Any earlier repairs that need removing first
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
A couple of clear pictures is all it takes. It helps if you send:
- Any details about the material
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Where you are, by postcode
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlords, agents and businesses in Lanescot
If you manage property in Lanescot, we’ll quote for several properties at once. Just send photos for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
