Orkney Islands · Scotland

Bath re-enamelling & resurfacing in Lady, Orkney Islands

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Lady. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Lady

Landlord and trade work in Lady

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Landlords, letting agents and housing providers in Lady use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.

How we handle bath re-enamelling in Lady

When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and a bath in a colour that no longer suits.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Lady (KW17)
Area hub
Orkney Islands
Warranty
12 months on all our work
Price
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026

What affects the price in Lady

Prices start from £350. There’s no area surcharge for Lady. What changes the price is:

  • The size and number of damaged areas
  • Unusual colours or finishes
  • How easy the damage is to reach
  • What kind of damage it is

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send photos for a quote

Almost every job we do is priced from pictures. This is what to send:

  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • A wider photo showing the entire bath
  • The material, if you know it

The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say right away if a repair is the right fix.

Why repair rather than replace?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

What you get with us

  • CHAS and Constructionline accredited
  • Free fixed quotes from pictures
  • Colour mixed on the day to match
  • Nothing taken out or refitted

See our prices page or bath cost comparison.

Lady and nearby

Lady is about 24 miles north-east of Kirkwall, in the Orkney Islands. We visit homes and businesses in Lady, so you don’t need to take anything anywhere. Our repair technicians cover all 51 towns and villages in the Orkney Islands.

All of KW17 is covered. Nearby, we also work in Broughtown (2 miles west), Wardhill (10 miles south), Pierowall (16 miles west), Rackwick (16 miles west) and Brinian (18 miles south-west). If you are somewhere remote, call first so we can plan the visit.

Near you in Lady

Our customers here include homes close to Sanday, among other places. Well-known places in the area include Warsetter Farm Museum (0.8 miles south-west). The countryside around Lady includes Loch of Baasley.

Map of Lady © OpenStreetMap contributors

What we do, step by step

When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We tidy up before we leave and let you know when you can use it again.

  1. First we protect the bathroom and set up ventilation.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We prepare the surface and apply a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Plan for the room to be out of bounds to pets and children
  • Let us know which floor the room is on

Getting a price

For a price in Lady, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

Looking after it afterwards

Once the work has cured, treat it gently:

  • Stick to gentle, non-abrasive cleaners
  • Do not leave bottles, razors or sponges standing on the surface
  • Get any chip repaired quickly
  • Wash away dyes and oils after use

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Common problems we fix in Lady

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Customers generally contact us about:

  • A coloured bath you want in white
  • Lots of chips and rust spots
  • Wear marks under the taps
  • A dull, rough surface that will not come clean

Before you book anyone

  • Whether cleaning and preparation are in the price
  • How the colour is matched
  • Is the price fixed, and does it include VAT?
  • How your room will be protected

Choosing a repair company

What we cannot put right

To be straight with you, there are a few things a repair won’t fix:

  • A bath split right through the body
  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up

If in doubt, send pictures and we will say what we think before you book.

What we work on

  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops

Questions from Lady

What happens next?

You’ll get a fixed quote back, typically with dates to choose from. You’re under no obligation.

How do I book?

Some photos, your postcode and how to reach you. On the day, access to the room.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.

What if the damage is worse than the pictures show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so let us know about it.

What areas do you cover?

We cover the entire UK, including Lady and the rest of the Orkney Islands. Just include your postcode and we’ll confirm dates.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Do you cover Lady?

Yes. We cover the whole UK and travel to Lady. Send pictures and we’ll quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.