Buckinghamshire · England
Bath re-enamelling & resurfacing in Lane End, Buckinghamshire
Local bath re-enamelling for Lane End: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A roll-top that is seen better days
Bath re-enamelling in Lane End, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and common reasons people get in touch are a peeling or bubbling previous coating and lots of chips and rust spots.
Every repair is covered by our one-year guarantee.
- Where
- Lane End (HP14)
- County
- Buckinghamshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Lane End
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
About Lane End
Lane End is about 4 miles west of High Wycombe, in Buckinghamshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Lane End is one of 263 places in Buckinghamshire where we work. You can also see our page for London, about 33 miles away.
We work across the HP14 postcode area. Local streets include High Street, Church Road and Elwes Road, and we cover them all. Main roads around Lane End include the B482, so getting to you is simple. Other places close to Lane End include Wheeler End (1 mile north-west), Bolter End (1 mile north-west), Piddington (1 mile north), Frieth (1 mile south-west) and Little Frieth (1 mile south-west). Within a short drive, we also cover Aylesbury (14 miles north), High Wycombe (4 miles east), Chesham (11 miles north-east), Marlow (4 miles south-east), Amersham (11 miles east) and Beaconsfield (8 miles east).
Local landmarks in Lane End
In Lane End, that means homes near Grouse & Ale, Cressex Community School and Lane End Primary School, among other places. For rail, the closest station is High Wycombe station, roughly 3.8 miles east. Well-known places in the area include Wycombe Hospital (3.3 miles east) and West Wycombe Rural (1.8 miles north). Open spaces near Lane End include Yoesden.
Should you replace it?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day. Prices start from £350. Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Technicians who travel to you, UK-wide
- We leave the room as we found it
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page and guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Lane End
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Do you come to Lane End?
Yes. We cover the entire UK and travel to Lane End and the rest of Buckinghamshire. Send pictures and we will quote, or call 0345 017 0787.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you cover the entire of Buckinghamshire?
Everywhere in the UK, Lane End included. There’s no extra charge for travel.
The process
Arrival times are agreed in advance. On site, it takes the best part of a day. The room is left tidy and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
- Make sure the area is dry
Ask for a price
Most customers in Lane End get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Nearby places to Lane End
What else we do in Lane End
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Lane End. The price comes down to:
- The material
- What kind of damage it is
- Any earlier repairs that need removing first
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
You can typically get a fixed quote without us visiting. To make it quick:
- What it’s made of, if you know
- A clear, close picture of the problem area
- Something in shot to show the size
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Common problems we fix in Lane End
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
Customers normally contact us about:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- An old resurfacing that’s failing
- Enamel that’s lost its shine and feels rough
Comparing quotes
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
- How to look after the finish
- What the guarantee covers, and for how long
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
