Lancashire · England
Bath re-enamelling & resurfacing in Lathom, Lancashire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Lathom. Free, fixed quotes from your photos.
- Resurfacing from £350
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
What bath re-enamelling costs
Resurfacing from £350. There’s no area surcharge for Lathom. The price reflects:
- The type of damage
- How many areas need work
- Unusual colours or finishes
- Any earlier repairs that need removing first
Our prices are the same across the UK, so there’s no premium for Lathom. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- Something in shot to show the size
- A close-up of the damage, in focus
- Any earlier repairs or coatings
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Bath re-enamelling at your home in Lathom
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with an outdated colour you’d like to change and chips and rust in more than one place, we can help, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Lathom (L40)
- County
- Lancashire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Lathom: your questions answered
What happens once I’ve sent photos?
You’ll get a fixed quote back, usually with dates to choose from. There is no obligation to book.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Do the materials smell?
There may be a mild smell during the work.
Landlords, agents and businesses in Lathom
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
What we do, step by step
Your technician turns up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Have a window or extractor fan available
- Clear the area around the damage
- Tell us if there are stairs or a lift
Ask for a price
Email us a picture of the damage and one of the whole item, and tell us you are in Lathom, and we’ll come back with a fixed quote.
Advice
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Do not leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Lathom and nearby
Lathom is about 3 miles north-west of Skelmersdale, in Lancashire. Clients in Lathom get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Lathom is one of 482 places in Lancashire where we work. You can also see our page for Liverpool, about 13 miles away.
Our visits in L40 work the same way as everywhere else we cover. If you are just outside Lathom, we cover Ring o' Bells (1 mile north), Hoscar (1 mile north-east), Westhead (1 mile south-west), Burscough (1 mile north-west) and Brighouse Green (2 miles south). Within a short drive, we also cover Preston (14 miles north), Chorley (9 miles north-east), Lytham St Anne's (14 miles north-west), Bamber Bridge (12 miles north-east), Leyland (10 miles north-east) and Fulwood (15 miles north).
Local landmarks in Lathom
Around Lathom, we work in homes near Burscough Priory Academy, Lathom House Chapel Of St John and Ring O'Bells pub, among other places. The nearest railway station is Burscough Junction station, about 1.4 miles north-west. Well-known places in the area include Ormskirk and District General Hospital (2.2 miles south-west). The countryside around Lathom includes Martin Mere and WWT Martin Mere.
Do you need bath re-enamelling in Lathom?
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Get in touch if you’ve noticed any of these:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Wear marks under the taps
- Stains that won’t shift
What to look for in a quote
- How your room will be protected
- Whether there are any call-out or travel charges
- Who turns up on the day
- Whether the colour is mixed to match
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
More services for Lathom
About our accreditations · Every repair comes with a one-year guarantee.
