Shropshire · England
Bath Re-enamelling in Leaton
Bath re-enamelling in Leaton without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Several chips and rust patches
Bath re-enamelling in Leaton, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with staining under the taps and around the waste and a roll-top that’s seen better days, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Leaton (SY4)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Nearby places to Leaton
Also in Leaton
Our work in Leaton
Leaton is about 4 miles north-west of Shrewsbury, in Shropshire. Whether you’re in the middle of Leaton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Leaton is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 43 miles away.
All of SY4 is covered. You will find Leaton on the B5067, so it’s easy for us to reach. Neighbouring places we cover include Bomere Heath (1 mile north-east), Preston Gubbals (2 miles east), Albrighton (2 miles south-east), Harmer Hill (3 miles north-east) and Haston (3 miles north-east). Further out, we also cover Shrewsbury (4 miles south-east), Oswestry (13 miles north-west), Coleham (5 miles south-east), Kingsland (4 miles south-east), Whitchurch (15 miles north) and Belle Vue (5 miles south-east).
Near you in Leaton
In Leaton, that means homes near Bomere Heath CofE Primary School and Church of the Holy Trinity and the streets around them. The nearest railway station is Shrewsbury station, about 4 miles south-east. Further afield, we also cover the area around Myddle Castle (3.1 miles north) and The Parade Shopping Centre (3.9 miles south).
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Common problems we fix in Leaton
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Look out for any of the following:
- Wear marks under the taps
- An old resurfacing that’s failing
- Lots of chips and rust spots
- Stains that will not shift
What your quote should include
- How long it needs to cure
- Whether a trained technician does the job
- What aftercare is recommended
- Whether the colour is mixed to match
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What happens on the day
Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Repair or replace in Leaton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- We’ll tell you if it’s not worth repairing
- Nothing taken out or refitted
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
Take a look at our prices page and bath cost comparison.
FAQs for Leaton
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
How do I get a price for bath re-enamelling in Leaton?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your SY4 postcode.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- What kind of damage it is
- How easy the damage is to reach
- The material
Our prices are the same across the UK, with no extra for Leaton. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- One sharp close-up of the damage
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
