Lancashire · England
Bath Re-enamelling in Leck
Full bath re-enamelling and resurfacing in Leck, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
Repair or replace: which is better?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why Leck customers choose us
- Colour-matched on site
- One-year guarantee on every repair
- Work done at your home or business
- Generally one visit, start to finish
Take a look at our prices page and guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Leck
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on pressed steel baths, acrylic baths and basins & shower trays, and common reasons people contact us are worn patches where water runs and sits and a period or roll-top bath worth keeping.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Leck (LA6)
- Region
- Lancashire
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before booking. We look at:
- The colour and finish to match
- The material and finish
- The type of damage
- The size and number of damaged areas
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from photos
Two or three clear pictures are normally enough. It helps if you send:
- A picture taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
When to call us in Leck
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Common reasons people in Leck contact us are:
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
Comparing quotes
- How soon you can use it again
- How changes to the job are handled
- If travel is included in the price
- How the room is protected while they work
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What happens on the day
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. Allow a full day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Getting a price
For a price in Leck, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Questions from Leck
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How to care for the repair
To keep it looking its best:
- Don’t use the bath until it has fully cured
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
What we can’t put right
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About Leck
Leck is about 12 miles south-east of Kendal, in Lancashire. We visit homes and businesses in Leck, so there’s no workshop to go to. We work in 482 places across Lancashire, from the larger towns to small villages. You can also see our page for Leeds, about 48 miles away.
Our technicians cover all of the LA6 postcode area. Close by, we cover Ireby (1 mile south-east), Nether Burrow (2 miles south-west), Burton in Lonsdale (3 miles south), Wrayton (3 miles south-west) and Wennington (4 miles south). We also work in nearby towns such as Lancaster (14 miles south-west), Morecambe (15 miles south-west), Westfield War Memorial Village (14 miles south-west), Carnforth (10 miles south-west), Poulton-le-Sands (15 miles south-west) and Bare (14 miles south-west).
Local landmarks in Leck
Locally, our jobs take us to homes close to Cowan Bridge School, Leck St Peter's Church of England Primary School and St Peter's Church. The closest station to Leck is Wennington station, about 4.6 miles south of the centre. Well-known places in the area include Thurland Castle (3.1 miles south-west). Green spaces nearby include Constitutional and Terrybank Tarn.
Towns and villages near Leck
What else we do in Leck
About our accreditations · Every repair comes with a one-year guarantee.
