Staffordshire · England

Bath re-enamelling & resurfacing in Leekbrook, Staffordshire

We travel to Leekbrook for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Leekbrook?

How we handle bath re-enamelling in Leekbrook

If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our technicians work on acrylic baths, pressed steel baths and Victorian roll-tops, and the jobs we see most are a coloured bath you want in white and staining under the taps and around the waste.

We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.

Roll-top bath being refinished by a Surface Doctor technician
Location
Leekbrook (ST13)
County
Staffordshire
Guarantee
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026

How it works

Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for most of the day from start to finish. Before leaving, we tell you when it can be used and how to look after it.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Keep pets and children out of the room while we work
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

Ask for a price

Send us photos of the damage and one of the whole item, and tell us you are in Leekbrook, and we will reply with a fixed quote.

Send photos for a quote

Related advice

Leekbrook and nearby

Leekbrook is about 2 miles south of Leek, in Staffordshire. Whether you’re in the middle of Leekbrook or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 512 places in Staffordshire. Our jobs stretch from Leekbrook to Manchester (28 miles away).

Our visits in ST13 work the same way as everywhere else we cover. Whether you live on Clover Grove, Wardle Gardens and Cheadle Road or anywhere nearby, we can come to you. We also travel to Cheddleton Heath (1 mile south), Birchall (1 mile north-east), Barnfields (1 mile north), Woodcroft (1 mile north) and Cheddleton (1 mile south-west). Larger places within reach include Newcastle-under-Lyme (10 miles south-west), Longton (8 miles south-west), Stone (14 miles south), Biddulph (7 miles west), Alsager (12 miles west) and Kidsgrove (9 miles west).

What’s near Leekbrook

Around Leekbrook, we work in homes near Church of St Edward the Confessor, All Saints CofE First School and Westwood College. Well-known places in the area include St Edward's Hospital (0.6 miles west) and Nursing History Museum (0.6 miles west). Not far away are Coombes Valley RSPB reserve and Gun.

Map of Leekbrook © OpenStreetMap contributors

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Leave the bath for the full curing time before using it
  • Have chips seen to early
  • Wash away dyes and oils after use
  • Don’t leave bottles, razors or sponges standing on the surface

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Should I try a DIY kit first?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

How we price bath re-enamelling

Resurfacing from £350. There’s no area surcharge for Leekbrook. What changes the price is:

  • How many areas need work
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • How many items we do on one visit

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Send photos for a quote

Good photos mean an accurate price. Here’s what helps:

  • Your postcode, so we can check dates
  • The material, if you know it
  • Daylight if possible, and no flash reflection
  • A close-up of the damage, in focus

You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Repair or replace in Leekbrook?

Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Leekbrook

  • Work done at your home or business
  • Same prices wherever you are
  • A fixed quote before you book
  • Usually one visit, start to finish

Read our full price list and bath cost comparison.

Questions from Leekbrook

How much does bath re-enamelling cost in Leekbrook?

Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

What happens next?

We come back with a fixed quote, plus dates. You’re under no obligation.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is there a guarantee?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Is there a call-out fee?

There is no separate call-out charge. Your fixed quote includes everything.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

Landlord and trade work in Leekbrook

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

What a repair cannot fix

We would rather lose a job than do one that won’t last, so these are the limits:

  • Leaks from fittings rather than the bath
  • A bath that’s rusted through
  • A cast iron or steel bath that is cracked right through

If in doubt, send pictures and we will say what we think.

What we work on

  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths
  • Victorian roll-tops
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.