Moray · Scotland
Bath Re-enamelling in Longmorn
Local bath re-enamelling for Longmorn: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that’s seen better days
Repair or replace in Longmorn?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. Compared with replacing, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour-matched on site
- No need to remove anything
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or bath cost comparison.
Bath re-enamelling in Longmorn, done in place
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. Our repair technicians work on basins & shower trays, acrylic baths and pressed steel baths, and people most frequently call us about wear marks under the taps and staining under the taps and around the waste.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Longmorn (IV30)
- County
- Moray
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Longmorn
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Doing more than one item at once
- How much damage there is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed quote
Two or three clear photos are generally enough. It helps if you send:
- Something in shot to show the size
- A photo taken from further back
- Any details about the material
- A clear, close picture of the problem area
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
How to care for the repair
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
- A quick wipe after use keeps limescale away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
About Longmorn
Longmorn is about 3 miles south-east of Elgin, in Moray. Wherever you are in the IV30 postcode area, we carry out the work at your property. Our technicians cover all 58 towns and villages across Moray.
We cover every part of the IV30 postcode area. Other places close to Longmorn include Fogwatt (1 mile south), Thomshill (1 mile west), Hallowood (2 miles north-east), Ashgrove (2 miles north) and Elgin (3 miles north-west). Within a short drive, we also cover Buckie (13 miles east), Forres (12 miles west), Lossiemouth (8 miles north), Keith (13 miles east), Burghead (10 miles north-west) and Fochabers (7 miles east). For island and remote addresses, call first so we can plan the visit.
Landmarks near Longmorn
Locally, our jobs take us to homes close to Elgin High School and the streets around them. Longmorn’s nearest station is Elgin station, roughly 2.7 miles north-west of the centre. Further afield, we also cover the area around Dr Gray's Hospital (3.1 miles north-west) and St Giles Centre (3.1 miles north-west). Not far away are Findlay's Seat.
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Have a window or extractor fan available
How to get a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Advice
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Signs you need bath re-enamelling in Longmorn
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Look out for these signs:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- Stains that will not shift
- Worn patches where water runs and sits
Before booking anyone
- How soon you can use it again
- What preparation is included
- How to care for the finish
- How changes to the job are handled
Other services in Longmorn
Questions from Longmorn
What areas do you cover?
The entire UK, including all of Moray. Send your postcode with your pictures and we’ll offer you dates.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include pictures of each item.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
About our accreditations · Every repair comes with a one-year guarantee.
